普通冲床的数控改造.doc

毕业设计（论文） 题 目 系 （院） 自动化系 专 业 班 级 200级班 学生姓名 学 号 指导教师 职 称 二〇一年月日独 创 声 明 本人郑重声明：所呈交的毕业设计(论文)，是本人在指导老师的指导下，独立进行研究工作所取得的成果，成果不存在知识产权争议。据我所知，除文中已经注明引用的内容外，本设计（论文）不含任何其他个人或集体已经发表或撰写过的作品成果。对本文的研究做出重要贡献的个人和集体均已在文中以明确方式标明。 本声明的法律后果由本人承担。 作者签名: 二〇一年 月 日 毕业设计（论文）使用授权声明 本人完全了解滨州学院关于收集、保存、使用毕业设计（论文）的规定。 本人愿意按照学校要求提交学位论文的印刷本和电子版，同意学校保存学位论文的印刷本和电子版，或采用影印、数字化或其它复制手段保存设计（论文）；同意学校在不以营利为目的的前提下，建立目录检索与阅览服务系统，公布设计（论文）的部分或全部内容，允许他人依法合理使用。 （保密论文在解密后遵守此规定） 作者签名: 二〇一年 月 摘 要The CNC Transformation of General Punch Abstract Ordinary punch punching start-stop is through the machine by the artificial foot pedal control, The workpiece on the worktable movement is by manual control.Because ordinary punch processing precision is low, not mass production, the degree of automation is not high, with the increasing demands of todays industrial equipment sophistication, the general press is increasingly unable to meet the production requirements. In order to reach a high machining accuracy, improve production efficiency, the general press numerical control open loop transformation. The transformation is mainly from the mechanical part and control part . The first is the original ordinary punch worktable engineered to contain two directions of the working table, the control system uses the computer to open-loop control on the vertical and horizontal system,the drive element adopts a step motor, drive system adopts a ball screw. The control part uses the MCS-51 series singlechip motor control system, so that the punch automatic feeding, automatic stamping and other functions. In order to coordinate the relationship between the mechanical part and control part, Position sensor needs to be installed in the press punch, to detect punch location, so that the control section to issue appropriate instructions to control the punch to make the appropriate action. The mechanical part of the ball screw and the selection of step motor and related calculati