毕业论文(终稿)配套论文剖析.docVIP

毕业设计说明书 基于51单片机的温湿度采集系统设计 办学单位： 班 级： 学 生： 指导教师： 提交日期： 2014 年 12 月 日 中 文 摘 要 温湿度控制系统早已经成为当代社会研究的热门领域之一，同时温湿度也是现今工农业生产生活中必须要首先考虑的重要因素之一。因此现今社会生产生活中就迫切需要一种价格较便宜、易操作而且精确度高的温湿度控制系统。本系统设计就是利用ST89C52单片机对温湿度参量进行检测进而实现对温湿度参量的控制。 本系统设计通过使用单片机ST89C52、DHT11传感器模块、LCD1602液晶显示屏模块以及蜂鸣器报警模块。简易的系统设计就能够基本上满足本系统设计的系统设计要求。DHT11数字温湿度传感器负责把采集到的温湿度信号传送给单片机ST89C52。温湿度经过ST89C52单片机处理，然后ST89C52O把温湿度信号发送到LCD1602液晶显示屏模块，温湿度数据就可以准确地显示到LCD1602液晶屏上面，同时我们可以分别对温度和湿度设置上下值限，超越限值蜂鸣器报警。 关键字： 单片机；DHT11温湿度传感器； LCD1602显示 Abstract Temperature and humidity control system has already become one of the most popular areas of todays social research, one of the factors of temperature and humidity is also todays industrial and agricultural production life must first consider important. Therefore the social production and living an urgent need for a cheap, easy operation and high precision temperature and humidity control system. The system design is the use of the ST89C52 microcontroller temperature and humidity parameters for testing so as to realize the control of temperature and humidity parameters. This design by using ST89C52 microcontroller, the DHT11 sensor module, LCD1602 LCD module buzzer module. Simple design can be substantially meet the design requirements of the design. DHT11 digital temperature and humidity sensor is responsible for the collected temperature and humidity signal is transmitted to the ST89C52 microcontroller. Temperature and humidity after ST89C52 single-chip processing, and then ST89C52 accurate temperature and humidity signal is sent to the LCD1602 LCD display module, temperature and humidity data can accurately display the LCD1602 LCD screen above, and we can set upper and lower limits of temperature and humidity, the more limiting buzzer flashing alarm. Keywords:ST89C52 microcontroller, the DHT11 sensor module, 1602 LCD module, 目录 中 文 摘 要 0 绪论 2 1.1选题背景 2 1.