热喷涂涂层的锌和铝-锌金属讲述.pptVIP

2007.5.23 James Weber / Zn, Al, Coating Equipment Thermal Spray Coatings of Zinc and AluminumZinc Metallizing Prepared byJim Weber - Sulzer Metco (US) Inc. – Westbury, NY Thermal Spray Materials Development Systems Engineering Equipment Research Development Field Service Manager Training Manager Quality Assurance Manager Currently the Product Line Manager for industrial markets, focusing on combustion (wires, powder, HVOF) and arc equipment Latest industry focus - working with NACE International (National Association of Corrosion Engineers) and the petrochemical industry to solve Corrosion Under Insulation (CUI) problems with Thermal Spray Aluminum (TSA) coatings and with the Gas Technology Institute (GTI) solving natural gas transmission and metering station corrosion problems. Information A brief introduction to thermal sprayed coatings are of Zn (TSZ), Al (TSA), and their alloys (85/15 Zn/Al), and how they provide long term corrosion protection Some examples of where are these coatings are used and how they have performed A brief introduction to galvanizing and its comparison to thermal spray coatings An overview of the most popular types of equipment that apply these coatings Question answer session What is Thermal Spray? Thermal spray is NOT a welding process Thermal spray coatings are a melted, or softened ceramic, metallic, or polymer materials are transported by a gas stream to a properly prepared substrate What is Thermal Spray? These coatings are typically mechanically bonded to a grit blasted surface Metals that feed into the thermal spray gun are the actual coatings. There are no solvents or VOCs. The coatings are similar to the metals being sprayed, however there are some important differences There are metal oxide stringers and porosity in the coatings Metal particles in the coating create a layered effect within the coating structure Due to the rapid cooling of the metal particles as they adhere to the substrates, thermal