三峡电站大型发变组变压器保护研制.pdf

计方法进行了分析研究。采用了面向对象的基于继电器功能模块的软件设计方法，提 高了软件开发效率，且易于维护和功能扩展，同时可方便实现保护内部动作逻辑的全 程监测和记录。论文介绍了保护软件的基本结构，模块化设计的基本思路和主要程序 模块的编程实现方法。 所开发的三峡大型变压器保护装置已通过了全面的静态测试和动模实验验证，结 果表明，装置的总体性能达到设计要求。文中介绍了主要试验内容和具体的试验结果。 关键词：三峡电站 发电机－变压器组 变压器保护 保护原理 软件设计 II Abstract Three Gorges Generator sets have very high-capacity, its running safety and stability have an important impact on Three Gorges station and even on the whole power system. So far most of the large multi-branch generator-transformer sets have adopted foreign protection, though they have had good performances, there still existed some problems to be improved. At the same time, as start building of many hydropower stations of China, the protection’s nationalization of large generator-transformer sets needs to be solved. So taking the running characteristic and application requirement of Three Gorges large generator-transformer sets, it is a study with very important theoretical and realism value to develop domestic large generator-transformer sets protection with high performances. Combining the development of generator-transformer sets protection, this paper focused on the development of transformer protection. At first, development history of transformer protection has been reviewed and then the protection’s study has been analyzed and surveyed. This paper presented the key points and the major contents on the basic of previous. The design principle and required function of transformer protection have been explained and the general design has been made on the basis of Three Gorges generator-transformer sets’ structure and protection’s requirement in this paper