核电厂液态流出物在线监测系统监测设备分析.pptxVIP

核电厂液态流出物在线监测系统监测设备调研;1 Canberra：LEM 600 2 Canberra：OLM100 3 Saphymo：LM100s 4 Miron: LM 211S 5 VF：LEM系列 6 Apantec：LM1 7 FLUKE：Off-line Liquid Effluent Monitor ;LEMS 600（秦山核电厂现采用系统）;1;1;OLM100（可能为秦山拟改进的系统）;2;2;LM100S/radiation-measurement/radiation-monitoring-systems/lm100s-in-line-liquid-monitor/253.htm;LM100S - In-line liquid monitor In-line liquid volumetric activity monitoring The Liquid Monitor LM100S is used for continuous monitoring of liquid effluents volumetric activity. This monitor is designed to complete all monitoring systems in nuclear facilities (reprocessing plants, nuclear power plants, accelerators, research laboratories…), where continuous monitoring of liquid effluents volumetric activity is required.It is generally used for low volumetric activity monitoring under normal operating conditions. The monitor displays the measured volumetric activity and triggers alarms whenever preset threshold levels are exceeded. The LM100S is part of the SYSRAY RMS system. Specifications: Monitored radiationγ Energy100 KeV to 2,5 MeV Detector11/4 x 1 NaI Scintillator Measuring range103 to 109 Bq/m3 lead shielding10 cm TID100 Gy Temperature - Operational+5 to +40°C - Occasional+5 to +55°C - Effluent temperature+10 to +60°C;LM211S/products/liquid-monitors/;PRODUCT LINE DESCRIPTION Our liquid monitors detect radiation in?effluent releases or operational processes and?use a 1?x1 NaI scintillation detector?inside?a liquid sampler?with 4 π lead shielding to detect gamma emitting isotopes. A radioactive source is built into the NaI crystal which allows drift compensation whenever temperature changes occur. On-line, off-line, in-line and/or adjacent-to-line liquid monitors Scintillation detector NaI (Tl) 1 ? “ X 1” Measurement range: 10-7 to 10-1 μCi/Cc 1E qualification and embedded safety-related software 4π 2” shielding or 4π 4” shielding Embedded 241Am source for temperature drift compensation Available under 10 CFR 50 App. B, ASME NQA-1 and IEC61226 programs