张彦龙(第四代移动信的研究).docVIP

摘要 Graduation design is to cultivate students comprehensive knowledge of basic theory, the elementary knowledge and the basic skill, analysis and the ability to solve practical problems. It has a very strong practicality and comprehensive, is to cultivate students work independently of a good way and method. In the design process, review and consolidate the before I learned the basic theory and professional technical knowledge, to make up for the lack of their own in these aspects, and more deeply realized as a builder either in the design or in the construction process, must take the rigorous scientific attitude to the theory and practice and connected. In the design, I looked through a large number of reference material, and strive to make of knowledge constantly systematic, constant mastery. This design is shenyang railway office structure design, asked to complete the necessary graduation thesis and architectural construction drawing and structure construction drawing and drawings. The project covers an area of about 1206.9 square meters, with a total construction area of 6034.6 square meters, five layers, layers of the first high of 3.9 m, the others each layer upon layer which is 3.6 meters high. The main structure of reinforced concrete building the cast-in-situ frame structure, column grid size of 3.3 m x 6.0 m, the total length of 82.64 m, width is 14.64 m total, total height of 18. 1 m. This design including building design and structure design of two parts. Design content including (architecture design part) plane design, the vertical design, the design of cross and the corresponding component design, (structure design part) calculation model selection, the load calculation, internal force calculation and component design and the corresponding reinforcement figure. By 240 mm thick wall hollow bricks cement block; The stairs of the wall between 240 mm solid block; By 240 mm thick wall inside the hollow cement block. The pillars 500 mm x