DJ-01棒料切割机机械CAD图纸设计.doc

DJ-01棒料切割机设计 摘 要 本次设计主要做出了DJ-01棒料切割机切割部分、夹紧部分、纵横行走部分等机械部分，切割机的电气控制线路和PLC自动控制等控制部分，切割机的气压系统等传动部分的设计。为了降低生产成本，提高生产效率要求切割机必须能够实现较高精度的定长切割，必须有较快的运动速度及运动精度，在这样的要求下我及我公司多位同仁的共同努力下，经过多次的实验改进终于做出了DJ-01这台较优秀的金属棒料切割机，它的工作是由PLC控制电磁阀，使电磁阀控制气缸，并由气缸驱动与其连接的部件，实现对棒料的准确定长切割，切割后自动返回初始位置。一个切割机分别切割两条钨棒，其切口深度为35mm，然后由压断机进行压断。从我们的实际使用情况来看这台机器操作简便，运行稳定、维护方便等优点，大大的提高了生产效率。该产品性能良好，不但能切钨棒，还可以切割其他的金属棒料并且功耗小可以广泛应用。 关键词：自动控制，切割，PLC DJ-01 BAR CUTTING MACHINE DESIGN ABSTRACT This design made the DJ-01 main bar cutting machine to cut parts, clamping parts, mechanical parts such as vertical and horizontal moving parts, cutting machines electrical control circuits and PLC automatic control, control parts, cutting machine pneumatic systems, transmission parts design. In order to reduce production costs, improve production efficiency requirements cutting machine must be able to achieve higher precision fixed-length cutting, there must be a faster movement speed and movement precision, such a request in for me and my company the joint efforts of many colleagues, After several experiments to improve the DJ-01 has finally made this station a more excellent cutting machine metal sticks, which is handled by the PLC control solenoid valve, solenoid valve to control the cylinder by cylinder drive connected components, to achieve the accuracy of the bar fixed-length cutting, cutting back to initial position automatically. A cutting machine cutting two tungsten rods, respectively, the incision depth of 35mm, then the pressure off machine pressure off. From our perspective the actual use of the machine easy to operate, stable running, easy maintenance and so greatly improved the production efficiency. Good performance of the product, not only can cut tungsten rod, you can also cut the other Metal Rod and power consumption can be widely used. KEY WORDS: Automatic Control, cut, PLC 目　录 前　言 1 第1章 切割机的整体结构 2 第2章 切割部分设计 3 2.1设计要求 3 2.2 方案设计 3 2.3 结构设计 4 2.3.1 砂轮片的选取 4 2.3.2 电机的选取 4 2.3.3 带传动设计 4