鼠标上盖注塑模具机械CAD图纸设计.doc

鼠标上盖注塑模具设计与仿真加工 摘要：本课题采用Pro/E以及EMX软件对鼠标上盖制品进行了零件造型及其模具设计。综合运用了注塑成形工艺与注塑模具设计的相关知识，从材料、厚度均匀性、脱模角和各成型面等方面分析了该零件的注塑成形性；根据零件体积和模具装配尺寸选择注射成形设备；在综合考虑生产批量、生产效率、精度要求等问题的基础上，制定了零件的成形工艺方案；进行了注塑模总体结构和零部件设计，绘制了模具装配图。 关键词：devise of plastic cap injection mold and simulation machining on mouse Abstract:The subject used Pro / E and EMX software products for the mouse covers parts of the modeling and mold design.Synthetically utilized the related knowledge of injection process and injection mould design,the mould of a back cover of a lap top was designed. Considerating material,thickness uniformity,ejection angle and pating surface,the injection performance of this part was analysised; based on synthetically considerating the injection procedure requests,product lot,productivity,precision requests, the process plan was established; the injection mould structure and the entire mould-parts were designed; the mould assembly drawing and the parts drawings of the main parts were drew; According to the volume of the part and the assembly size of the mould,injection machine was selected .KeyWords: Injection mold; The top cover of mouse; Pro/E; EMX 目 录 1 序言..........................................1 1.1选题依据 .......................................................1 1.2 国内外研究概括及发展趋势 ...................................... 2 1.3研究内容及实验方案 .............................................8 1.4 目标，主要特色..................................................8 2 鼠标上盖的三维建模............................10 3 模具设计.....................................14 3.1概述...........................................................14 3.2型腔数目的确定.................................................14 3.3注射模浇注系统设计.............................................15 3.4 注塑模凹凸模设计.............................................18 3.5 注射模的导向及脱模机构设计....................................20 3.6 模架的选取....................................................23 3.7 冷却系统的设计................................................24 4 鼠标上盖的N