围板包装箱自动生产线合围装置机械CAD图纸设计.doc

摘 要 Abstract Hoardings box as outsourcing logistics facilities around the crate more and more popular with customers , a huge amount of use . However, the backward the existing hoardings box mode of production in the production of man-made factors , which makes the production of hoardings box there is low productivity, unstable quality defects . This has seriously affected the application of hoardings box . In order to improve labor productivity, reduce labor intensity , reduce production costs , we conducted a research on the hoardings Box existing production process through the analysis of the production process of the original hoardings box , designed to adapt to the hoardings box automatically encirclement devices. The hoardings box on materials , stitching, drilling and riveting , encircled in the production process is divided into several parts process of this thesis is the design of the encirclement device . Two hinges to link two of the ends of the planks were riveted . Connected one end of the wood chain is the only hole , the other end is only half a face riveted hinge ( the other half of a riveting ) . First step is riveting half-face one end of the hinge in front the other end of the baffle to constrain the positioning ; second step the use of pneumatic cylinder to push the clamping block for clamping wood , so they can not like sliding ; after clamping device around the spindle 180 ° , repeat the first and second steps ( second rotation only 90 ° ) , so that the two pieces of wood encircled by the pan after clamping rotary device to make part moved to the riveting machine riveting , thus completing the encirclement on the rivet . Key words: Hoardings box ; encirclement ; riveting ; automated production lines 目 录 要 III Abstract IV 目 录 V 1 绪论 1 1.1本课题的研究内容和意义 1 1.2国内外的发展概况 1 1.3 本文主要设计内容 4 2 生产线总体结构设计 5 2.1 围板箱生产工艺分析 5 2.1.1 围板尺寸参数 5 2.1.2 生产线工艺流程 5 2.1.3 总体结构 7 2.1.4 生产节拍的拟定 7 2.1.5 控制系统 8 3 各部分具体设计 9 3.1木料传入部分设计 9 3.2 木料的定