设计举例研讨.ppt

一.看图写代码 二.自动售饮机设计 三.交通灯控制器设计 一、看图写代码 1.根据原理图写出相应的VerilogHDL程序 VerilogHDL实现如下： module mycir（DIN, CLK，QOUT); input DIN,CLK; output QOUT; reg A,B,C; always @ (posedge clk) begin A = DIN; B = A; C = B; end assign QOUT = ~(C (A ^ B)); endmodule VHDL实现如下： Library ieee; Use ieee.std_logic_1164.all; mycir is Port ( din, clk : in std_logic; Qout : out std_logic); End mycir; Architecture behave of mycir is Signal a, b, c; Begin Qout = c nand (a xor b); Process (clk) Begin If clk’event and clk = ‘1’ then A = din; B = A; C = B; End if;