HQ5120XLB后栏板起重运输汽车改装机械CAD图纸设计.doc

摘 要 本次设计的题目是设计。ABSTRACT The project topic is the design of the tailgate lift truck.Platecrane truck used car plate or additional lifting device for lifting and using the bodys power source to drive take-off and landing plate for loading and unloading of car goods ，thereby brings out the fast freight on some degree. It applies to boxes, bags, barrels, bundles, such as packaging of the loading and unloading of goods transport operations, so in the commercial, postal services, geological prospecting, book publishing, such as transport of goods sector showed the superiority of better. The article makes in-depth analysis of the program of the overall design on the basis of searching for a large number of relevant information, make a reasonable choice for chassis, Lifting mechanism, hydraulic system, tailgate and the related accessories. And also through the selection of the chassis, the article determines the performance parameters of the vehicle. On this basis, adding to the kinematics and mechanical analysis of the tailgate lift mechanism, it makes the identification and verification of the size of the tailgate lift’s movements. Meanwhile, adopting a hydraulic control system to controll each component, it carrys on the function of rising goods, lifting, and unloading goods, and though the design of hydraulic components, it determines the components of the hydraulic models. At this point, the article determines the overall parameters of the whole vechile. In addition, it makes the analysis and calculation for the whole after repacking to test whether it can meet the national standard. Keyword:Design modifications；Tailgate；Hauling-up device；Lifting mechanism；Hydraulic system