单臂液压铸造机机械CAD图纸设计论文.doc

摘 要 关键词：液压机；工作缸；强度 Abstract As one of the important technical means to achieve the modern machinery equipment transmission and control, hydraulic technology has been widely used in the field of the national economy. As a processing center in the world, Chinas machinery industry foundation function in the national economy is more and more obvious. Hydraulic machine technology level directly affects the development level of the national machinery industry. Single column hydraulic machine is an important part of the hydraulic machine, small forging under 8000KN hydraulic press often uses the “C” type single arm frame, mainly used for shaft parts profile correction and sleeve parts assembly, can also be used for such as tensile plate bending forming process configuration must be the attachment type of mold powder can be suppressed after molding and plastic molding repression, hydraulic machine design technology with independent is an important guarantee to make the national machinery industry can win in the international competition, the expansion has important theoretical and practical significance to study. The design of the 160KN bulk single column hydraulic machine, and the use of 2D drawing software AutoCAD to study the. This paper presents the technical parameters of 160KN single column hydraulic machine, the structure of machine, the working cylinder structure design and calculation of the data. Design and theoretical calculation of the whole frame structure and the main part of the structure was completed according to the design theory of hydraulic machine. The key components of overall structure of the hydraulic machine body and gives the calculation and analysis of the strength, the main contents include: the stress concentration analysis of structure, modify the initial design scheme, finally satisfied frame design strength and stiffness requirements. At the end of the 160KN single column hydraulic machine assembly drawing and t