基于ProE零件夹线卡的冲压工艺及模具机械CAD图纸设计.doc

摘 要 本次课题主要研究的是冲裁模和弯曲模的工艺结构设计。本文介绍 Abstract This design carries on blanking, the piercing progressive dies design.The article has briefly outlined the press die at present development condition and the tendency.It has carries on the detailed craft analysis and the craft plan determination to the product.According to general step which the press die designs, calculated and has designed on this set of mold main spare part, for example: The punch, the matrix, the punch plate, the backing strip, the matrix plate, stripper plate, stop pin, pilot pin and so on.The die sets uses the standard mould bases, has selected the appropriate press equipment.In the design has carries on the essential examination computation to the working elements and the press specification.In addition, this die employs the finger stop pin and the hook shape stop pin.The mold piercing and blanking punch are fixed with the different plates separately in order to coordinate the gap cenveniently; The piercing matrix and blanking matrix are fixed by the overall plate.Fell in the blanking punch is loaded by pilot pin, guarante the relative position of the hole and the contour , increase the processing precision.This structure may guarantee the die move reliably and the request of mass production. At the same time we have design the benting dies of the bracket. It have the same design process with the blanking and punching dies. it is a litter simple dies. And the benting dies is not the significant part. But the design process is suitable. Aim at parts characteristic of the part structural , I design the part measurement on use of innovating together with analysising . Also I design the part measuremen on use of CAD and Pro/E software ,it could improve our ability of we use the software. KEY WORDS: progressive dies 、ress mold 、 standard die sets、 press equipmeng、Pro/E 目 录 摘要 1 Abstract 2 1.绪论 6 1.1课题意义和研究的必要性 6 1.2模具行业在国内外的发展状况 6 1.2.1国内概况 6 1.2.2国外概况 7 1.2.3发展趋势 7 1