振动固体压实装置的机械CAD图纸设计振动系统设计.doc

摘 要 研究振动力场作用下固体输送段的动态输送理论是一个全新的概念。在振动力场作用下聚合物物料运动加剧，容易产生滚动，对固体输送段的填充起到积极作用，从而深化单螺杆挤出机的理论与工程应用。本设计的主要任务是振动系统的设计，然而振动系统又分为三大类：机械振动、电磁振动和液压振动。 本课程设计在相比较电磁振动和液压振动的的情况下，相比较与各个振动系统的优缺点情况下，最终确定了最适合本设计的振动方案，机械振动即物体或质点在其平衡位置附近所作的往复运动ABSTRACT Vibration force field of solid conveying section under the dynamic transport theory is a new concept. In polymer materials under vibration force field campaign intensified, prone to rolling, filling the solid conveying section play a positive role in deepening the single-screw extruder to the Theory and Application. Vibration-based design, however, certainly one of the main tasks, divided into three basic categories: mechanical vibration, electromagnetic vibration and hydraulic vibration. This course is designed in the comparison of electromagnetic vibration and hydraulic vibration of the case, compared with the advantages and disadvantages of each vibration system case, the final design to determine the most suitable for the vibration of the program, mechanical vibration or object or particle in its equilibrium position the reciprocating motion. This design uses vibration motors for the system to provide the necessary impetus for the use of the motor shaft will turn to export, and then the eccentric shaft on rotation, due to the role of eccentric, vibration plate can be made to do a regular vibration, but only need to provide different eccentric eccentricity amplitude can be different, because the characteristics of eccentric structure, the design of the introduction of spring as the accumulator, storage and release of the spring to meet the eccentric body to make do with vibration plate regular exercise. Must have an energy vibration to provide the vibration source, then according to the system needs to determine the vibration amplitude and frequency. If you want to be clear that the vibration of different frequencies, only need to adjust the motor speed. This design can be achieved by inverter motor speed, which is about the di