737-NG_ME口试考题.docVIP

737NG手册题14个 请在AMM手册中找到IDG勤务的章节号，并根据内容说出IDG勤务包含哪几项工作？ TASK 12-13-21-200-801 A. This procedure has these tasks: (1) IDG Oil Level Check (2) IDG Servicing (Oil Fill) (3) IDG Differential Pressure Indicator (DPI) Check (4) IDG Oil Change 2．请根据AMM中的主电瓶拆装工卡，说出主电瓶的安装位置，拆装时所需的工装（件号）。 A. This procedure has these tasks: (1) A removal of the Battery. (2) An installation of the Battery. TASK 24-31-11-000-801-001 (1) The M6 Battery is located below the E3 equipment rack in the main equipment area. (2) The battery is removed and installed in the forward cargo area. The circuit breakers on the J9panel are installed in the main equipment center. B. Tools/Equipment SPL-1633 Equipment - Battery Installation (Part #: C24003-1, Supplier: 81205, A/P Effectivity: 737-600, -700, -700C, -700ER, -700QC, -800, -900, -900ER, -BBJ) 3．请找出发动机燃油翼梁活门的工卡并回答拆装作动器是否需要油箱放油，完成作动器安装后所需要做的测试。 A. The spar valve contains three parts: the actuator, the valve adapter, and the valve body. B. It is not necessary to defuel the fuel tank to remove the actuator. It is necessary to defuel the fuel tank to remove the valve adapter or valve body. C. This procedure contains these tasks: (1) Remove the Actuator of the Spar Valve (2) Install the Actuator of the Spar Valve (3) Remove the Valve Adapter of the Spar Valve (4) Install the Valve Adapter of the Spar Valve (5) Remove the Valve Body of the Spar Valve (6) Install the Valve Body of the Spar Valve (7) Rework the Electrical Faying Surface Bonds for the Spar Valve TASK 28-22-11-000-801 For the actuator that you installed, do this task: Engine Fuel Spar Valve - Electrical Control and Indication Test, TASK 28-22-00-710-801 4．某根导线的线号为W0342-0001-18,请根据手册查出该导线所连接的两个电插头的设备号，该导线所在导线束的件号。 W0342 286A0342 FORWARD RIGHT HAND DOORWAY LINING 0001 18 PA 1-10 35-21-31 D40042J 5 D12606 5．请根据手册回答更换发动机启动活门时，需更换的封圈有几个？完成安装后所需要的工作有哪些？ TASK 80-11-03-400-801-F00 2个 6．已知某部件件号RSE120028, 请查出该部件的波音规范号、可选件号，是否适用于 B-5118???机？ 2