水溶性锂电池粘合剂应用精编.doc

学 号： 毕业论文 GRADUATE THESIS 论文题目：水性锂电池粘合剂应用研究 学生姓名： 专业班级： 学 院： 指导教师： 2015年05月25日 摘 要 锂离子电池在现代新能源中扮演着越来越重要的角色，在目前商品化锂离子电池中，粘合剂主要是PVDF,但是PVDF需要油性溶剂NMP，有机溶剂易挥发会严重污染环境，成本比较高，并且毒性特别大，会严重影响生产车间工人的身体健康。水性粘合剂具有无溶剂释放，绿色环保并且成本比较低，水性粘合剂符合锂电行业发展方向。 锂电池生产需要一定的生产工艺，优异的生产工艺可以制备出性能最佳的的锂电池。锂电池的制备不但需要最佳的物料配比，优化锂电池的正极和负极的导电物质与辅助物质的，从而使锂电池到达最优的容量，更高的寿命以及较好的充放电效率；还需要合理的操作工艺，以消除不必要的人为或环境带给实验的影响。 优异的锂电池需要一整套的检测装置进行检验，包括循环寿命、阻抗、充放电平台及充放电效率等，只有各方面都合格后才能到达消费者的要求，投入市场。 关键词 锂电池；水性粘合剂；电池制备；电池检测 Lithium battery in the modern new energy plays a more and more important role, in the commercialization of lithium ion battery, the binder is PVDF, but PVDF need oily solvent NMP and organic solvents are volatile will seriously pollute the environment, the cost is relatively high, and the toxicity is particularly large, will seriously affect the production workshop workers health.?Water-based adhesive has the advantages of no solvent release, green environmental protection and the cost is low, water-based adhesive with lithium industry development direction. The production of lithium battery requires a certain production technology. The best production technology can prepare the best performance of the lithium battery..?Life of lithium ion battery preparation not only need best material ratio, optimization of the anode and the cathode of the lithium battery conductive material and auxiliary material, so that the lithium battery to reach the optimal capacity, higher and better charge discharge efficiency; also need to reasonable operation process, to eliminate unnecessary human or environmental bring experiment. Excellent lithium battery needs a set of detection device for inspection, including the cycle life, impedance, charge and discharge platform and charge discharge efficiency, only all are qualified to reach consumers requirements, into the market. Keywords lithium battery ；water binder ；battery preparation ；battery detection 目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 锂电池的简史 1 1.1.1锂电池的发展 1 1.1.2 锂电池