拉矫机虚拟装配方法毕业设计讲课.docVIP

摘 要 随着国民经济的快速发展和生产规模的不断扩大，客户对钢材的质量和精度要求越来越高，一些板材、型钢和管材必须经过矫直过程才能达到用户要求。在这种背景下，矫直技术得以迅速发展，应用也越来越广泛。同时在产品设计阶段充分考虑产品的可装配性，来改善产品的装配性能，降低产品的装配成本。 本论文首先介绍了课题研究的目的和意义，综述了当前拉矫机的国内外研究状况。然后，对拉矫机进行分析，画出拉矫机的零件图与装配图。最后，阐述了一些虚拟装配的原理、技术、功能和特点，进行了虚拟装配系统的构建，提出了基于普通PC机为硬件平台、PRO/E和Auto CAD为软件平台的虚拟装配方法。分析了虚拟装配的特点和关键信息，研究了虚拟装配序列。同时还将这种虚拟装配方法应用到拉矫机的虚拟装配仿真中，取得了较好的效果。 关键词：拉矫机; 虚拟装配; 装配图; PRO/E; Auto CAD Abstract With the rapid development of the national economy and the expanding of production scale, quality and accuracy of the customers of the steel becoming more demanding, some sheet metal, steel and pipe must go through the straightening process in order to meet user requirements. In this context, straightening technology has developed rapidly, and applications are increasingly being used. At the same time in the stage of product design fully consider the product assemblability, to improve the assembly performance of the products, reduce product assembly cost. This paper first describes the purpose and significance of the research, domestic and international research status of the tension leveler, analysis of the tension leveler draw straightening machine part drawing and assembly drawing, and finally described a number of virtual assembly principles,techniques, functions and features, the construction of the virtual assembly system, the virtual assembly methods based on ordinary PC hardware platform, PRO / E and Auto CAD software platform. A virtual assembly of characteristics and key information. Virtual assembly sequence, Finally, this virtual assembly methods applied to the virtual assembly simulation of the tension leveler, and achieved good results. Key words: Straightening machine； Virtual assembly； Assembly drawing； PRO / E； Auto CAD 目 录 TOC \o 1-3 \h \u  HYPERLINK \l _Toc14211 1 绪论 1  HYPERLINK \l _Toc18540 1.1 论文研究背景、目的与意义 1  HYPERLINK \l _Toc1177 1.2 虚拟装配 2  HYPERLINK \l _Toc32457 1.2.1 国外研究概况 2  HYPERLINK \l _Toc20929 1.2