(第4组)电压控制增益可变放大器设计(VGA)设计.docVIP

题目: 电压控制增益可变放大器设计（VGA）设计 216第四组 摘要:基于压控增益放大器VCA822，设计一个能够对频率大于15MHz，幅值小于1V的信号进行调理的程控增益放大器。该放大器增益17~58dB可调，具有自动增益控制的功能。放大器的输出端用宽带运放AD811和分立元件搭建的推挽电路，加强该放大器的驱动负载的能力。 关键词：宽带放大器；VCA822；自动增益控制；推挽电路 Abstract: Using FPGA as control core, a new method of designing a programmable gain amplifier which can handle with the signal that has the frequency more then 15MHz, and the amplitude less then 1V by using volt-controlling gain amplifier VCA822 is presented as following. The amplifier can be modulated from 10dB to 58dB, with the function of automatically controlling gain. The output side of this amplifier adopts the push-pull circuit constructed by wideband amplifier AD811 and discrete components, and enforces its ability of driving loads. Key words: wideband amplifier; VCA822; control of gain; push-pull circuit 目 录 TOC \o 1-2 \h \z \u   HYPERLINK \l _Toc363027128 1、系统方案比较与设计  PAGEREF _Toc363027128 \h 3  HYPERLINK \l _Toc363027129 1.1总体方案论证  PAGEREF _Toc363027129 \h 3  HYPERLINK \l _Toc363027130 1.2主放大器选择  PAGEREF _Toc363027130 \h 3  HYPERLINK \l _Toc363027131 1.3中间放大级方案论证  PAGEREF _Toc363027131 \h 3  HYPERLINK \l _Toc363027132 1.4末级功率放大器方案论证  PAGEREF _Toc363027132 \h 4  HYPERLINK \l _Toc363027133 2、理论分析与计算  PAGEREF _Toc363027133 \h 5  HYPERLINK \l _Toc363027134 2.1带宽增益积分析  PAGEREF _Toc363027134 \h 5  HYPERLINK \l _Toc363027135 2.2输出电压幅值  PAGEREF _Toc363027135 \h 5  HYPERLINK \l _Toc363027136 2.3放大器稳定性分析  PAGEREF _Toc363027136 \h 5  HYPERLINK \l _Toc363027137 3、单元电路设计  PAGEREF _Toc363027137 \h 5  HYPERLINK \l _Toc363027138 3.1前级缓冲电路  PAGEREF _Toc363027138 \h 5  HYPERLINK \l _Toc363027139 3.2增益可调的中间放大级  PAGEREF _Toc363027139 \h 6  HYPERLINK \l _Toc363027140 3.3末级功率放大  PAGEREF _Toc363027140 \h 7  HYPERLINK \l _Toc363027141 4、系统测试  PAGEREF _Toc363027141 \h 7  HYPERLINK \l _Toc363027142 3.1测试方法  PAGEREF _Toc363027142 \h 7  HYPERLINK \l _Toc363027143 3.2测试步骤  PAGEREF _Toc363027143 \h