QT-00688Vr1.0 SMT回流和固化制程的控制要求.docVIP

SUZHOU SMT Reflow/Cure Process Control SMT回流和固化制程的控制要求信息分类： 三阶文件文件编号: QT-00688版本: 1.0页码:  PAGE 13 of 23 相关部门审核  SUZHOUSMT Reflow/Cure Process Control SMT回流和固化制程的控制要求信息分类： 三阶文件文件编号: QT-00688生效日期： 起草人： Yongxing Zhu审核人： Cliff Zhang批准人: Sam Zhang版本: 1.0页码: 1 of 23 相关部门审核  三阶文件1.Product Revision 产品版本 Product Name产品名称Applicable Product BOM Revision 适用的产品BOM版本 2.Change history更改记录 Updated Ver.最新版本Effective date 生效日期Prepared by起草人Brief of Amendments 更改内容摘要 3.Purpose目的 The purpose of this document is to establish the process controls required for the SMT reflow and cure processes. 这份文件的目的是建立SMT回流和固化制程的控制要求. 4.Scope范围 This document identifies best practices for ENICS on the reflow soldering process. 这份文件确定ENICS在印刷制程上的良好实践. 5.Definitions定义 IPC-T-50 - Terms and Definitions for Interconnecting and Packaging Electronic Circuits. IPC-T-50 电子装联产品的术语和定义 6.Responsibilities职责 SMT operators It is the responsibility of the SMT Operator to ensure the correct profile program is loaded. SMT作业员负责正确加载回流炉程序. SMT Technicians It is the responsibility of the technician to ensure that the profiles are available, and any new profiles are not saved as a Datapaq profile until they are within specification, and also be responsible for fabricating testing profile board, testing profile and printing the profile. SMT技术人员负责确保炉温曲线的有效性，保存符合规格要求的炉温曲线，并且负责制作炉温测试板，测试炉温并打印炉温曲线. SMT Line Supervisors It is the responsibility of the SMT Line Supervisors to ensure only trained operators are loading profiles into the machine. SMT线主管负责确保只有培训合格的作业员才能加载回流炉程序. SMT Engineer It is the responsibility of the SMT Engineer to indicate on any ECN, the requirement to re-pro