芳烃装置Elliott机械设备的安装毕业课程设计外文文献翻译.docVIP

PAGE  PAGE 9 The Aromatic Hydrocarbon Unit ELLIOTT Machinery Installation INTRODUCTION Proper installation of the machinery will contribute to long trouble-free operating life with minimum maintenance. To aid in making a proper installation, this chapter describes a detailed procedure that has proven successful for installing hundreds of turbines and associated equipment. Therefore, it is the method recommended by Elliott Company. Other procedures do exist which can provide a satisfactory installation; however, prior to using any of these alternate procedures, it is recommended that the purchaser carefully investigate both the procedure and the ability of workers to produce a permanent and satisfactory installation. Elliott Service Representatives are experienced in installation procedures and can assist in providing a good installation. The installation procedure contained in this chapter is as specific as possible but cannot possibly cover all variations in field conditions. Therefore, the Elliott Service Representative may sometimes deviate slightly from the published procedures. This is done to give a better installation by using procedures to fit specific field and service conditions. Regardless of the procedure used, first class materials and quality workmanship should be employed. The procedure recommended by Elliott involves the following items: Foundation Chock blocks Grouting Setting the equipment on foundation Shaft alignment Coupling Installation Piping Recommendations Included in this chapter is a detailed procedure for making “cold alignment” as well as methods for making machine “hot alignment” checks. While many aspects of an installation are the responsibility of the purchaser or his engineer, some suggestions are offered which may contribute to suitable installation. One such example is whether to install the machine outdoors under only a roof, or in a completely enclosed building. While this class of equipment can generally be installed o