基于欧姆龙可编程序控制器的6层立体车库设计外文文献翻译.docVIP

英文原文 THE 6 LAYERS STEREO GARAGE DESIGN BASED ON OMRON PLC Zhuoran Zhang Department of Electrical Engineering Wuhan Polytechnic University Wuhan, China E-mail: Harry zzr@126.com Zhe Mao, Hailing Wan Department of Electrical Engineering Wuhan Polytechnic University Wuhan, China E-mail:maozhe998@ Abstract—with the development of the modern society, the number of the vehicles in these cities has been increasing with an exponential speed; especially the private cars, putting a great pressure on urban transportation and parking slot. This article is mainly concerned about the entire structure, running procedure and electrical system design including hardware and program design ideas for lifting-traversing stereo garage, which will not only shorten the developing period but also orient parking to centralization and automation direction; Owning some reference value. Keywords- Stereo Garage, Omron PLC, Design Insufficient parking slots is resulted from the development of the cities, economy and transportation of the cities, the traditional garages are always making the use of the nature vacancy, in a community, the ratio between parking slots and residents is approximately 1:1, one parking slot for a family at least, in order to solve the contradiction that the parking slots using precious commercial land, the stereo mechanical garages with the advantage of the average parking slot takes of less area have been gradually in front of us. Compared with the traditional underground parking garage, the stereo garages have more advantages. First of all, the stereo garages can save more area. The traditional ways must be amassed driving path for vehicles, averagely, a car will take up 40m2 If we take multi-layers garage (6 layers) in to consideration, it is possible for 13 cars to park in the area of 50m2, which will save lots of land resources and land construction expenditure. Meanwhile, the stereo garage could guarantee the safety of the people and their cars. If there is an