单相AC—DC变换电路设计答题.doc

单相AC-DC变换电路设计报告 摘要：有源功率因数校正(Active Power Factor Correction ,简称APFC)技术因能提高电力电子装置网侧功率因数,降低线路损耗,节约能源,减少电网谐波污染,提高电网供电质量等优点,在许多行业中得到广泛的应用。本系统采用有源功率因数校正（APFC）方法，对BOOST主电路拓扑结构的升压电路的输入电流进行控制，使其达到与输入电压同频且相位差接近于0，功率因数接近于1，从而实现高功率因数电源。系统采用UCC28019作为控制芯片，提高了电源的功率因数，具有良好的电压调整率和负载调整率，输入电流波形失真度小于1%，功率因素大于0.98，效率接近于93.9%，且采用MCU对整个系统进行监测，可测量输出功率、功率因数以及可设置输出电压等功能。系统在设计时从布局布线和滤波等方面消除电磁干扰，能够实现输出电压、电流、功率因数的测量及中文显示功能。 关键词：APFC；AC-DC转换；UCC28019；BOOST电路 Abstract: Active power factor correction （APFC）technology for increasing power electronic device power factor, decrease line loss, save energy, reduce harmonic pollution, improving the quality of power supply and other advantages, is widely applied in many industries. This system uses the active power factor correction (APFC) method, to control the input current boost circuit of main circuit topology of BOOST, enables it to achieve the same frequency and phase with the input voltage difference is close to 0, power factor is close to 1, in order to achieve high power factor power. The system adopts UCC28019 as the control chip, and improve the power factor of power supply, with good voltage regulation and load regulation, the input current waveform distortion is less than 1%, power factor greater than 0.98, the efficiency is close to 93.9%, and the use of MCU to monitor the whole system, capable of measuring the output power, power factor and can set the output voltage and other functions. System design from the layout and filtering to eliminate electromagnetic interference, can realize the measurement and Chinese output voltage, current, power factor display function. Keyword：APFC,AC-DC conversion,UCC28019,boost circuit. TOC \o 1-3 \h \u  HYPERLINK \l _Toc5175 1. 方案设计与论证  PAGEREF _Toc5175 2  HYPERLINK \l _Toc10719 1.1总体方案设计与比较  PAGEREF _Toc10719 2  HYPERLINK \l _Toc22079 1.2 PFC控制方法分析及实现方案  PAGEREF _Toc22079 4  HYPERLINK \l _Toc20928 1.2.1 PFC控制方法分析  PAGEREF _Toc20928 4  HYPERLINK \l _Toc17227 1.2