端面泵浦Nd：YAG板条激光器仿真设计(终稿)答题.docVIP

PAGE  分类号：TN242 U D C：D10621-408-(2015)0896-0 密 级：公 开 编 号：2011031005 成都信息工程大学 学位论文 端面泵浦Nd:YAG板条激光器仿真设计 论文作者姓名：张博欣申请学位专业：电子科学与技术申请学位类别：工学学士指导教师姓名（职称）：何修军（副教授）论文提交日期：2015年05月26日 端面泵浦Nd:YAG板条激光器仿真设计 摘 要 端面泵浦Nd:YAG板条激光器以高增益、高效率、低阈值的优点被广泛研究与应用。本文简述了固体激光器的研究现状与发展，从激光基本原理出发，了解板条激光器的结构与理论分析。运用LASCAD软件仿真，对端面泵浦Nd:YAG板条激光器进行仿真设计。改变参数条件，对板条长度、入射泵浦功率、束腰的光斑尺寸、参考温度、晶体放置位置等6个方面进行了仿真计算。比较温度与折射率特性曲线的变化，以及输出功率的差异。结果得到，板条长度越长激光输出功率越高，左端泵浦比双端泵浦方式输出更高。而透镜的曲率半径都为负的条件下，选择较低的参考温度、较小的束腰的光斑尺寸的同时，要满足很好的温度与折射率特性，又要保证较高的输出功率。仿真实验中对Nd:YAG板条激光器在小功率方面的相关参数研究，对高平均功率板条激光器的研究与发展具有一定的参考意义。 关键词：端面泵浦；Nd:YAG；板条激光器；输出功率；LASCAD Simulation Design of End-pumped Nd:YAG Laser Abstract The advantages of high gain, high efficiency and low threshold for end pumped Nd:YAG slab lasers are widely studied and applied. This paper briefly described the research status and development of solid state laser. It also introduced the basic principles of laser, the structure and theoretical analysis of slab laser. In this paper, we used the LASCAD software to design the end-pumped Nd:YAG slab laser. We changed the parameter condition to obtain the simulation design, including these six aspects that the slab length, the incident pump power, the waist spot size, the reference temperature, the radius of curvature and so on. The difference of the temperature and refractive index curves and the output power are compared. The results showed that the output efficiency of left end-pumped is better than double-pumped mode. The longer the length of the slab is, the higher the laser output power is. When the curvature radius of lens were both negative, choose lower temperature of reference, the waist spot size should satisfy a good temperature and the refractive index characteristics, and also to ensure the high output power. In the simulation experiment, Studied on the correlation parameters of Nd:YAG slab laser with the small power, have reference value of the research and development of high average power sla