《WSG 7.6 Training – Hybrid》.pptxVIP

WSG 7.6 Training – Hybrid[Lesson | Lab] Lesson / Lab Number: Lesson / Lab NameHybrid 7.6 Lesson / Lab NameHybrid? 2009 Websense, Inc. All rights reserved.UI ChangesUpdates for Roaming User ConfigurationSupport for Customer Block Page ConfigurationSupport for smaller block pageSupport for Sync Service Status in ManagerSupport for PAC file UploadTricipher / Websense Authentication ServiceFiltered LocationsFiltered Location 1Filtered Location 2? 2009 Websense, Inc. All rights reserved.UI ChangesUpdates for Roaming User ConfigurationSupport for Customer Block Page ConfigurationSupport for smaller block pageSupport for Sync Service Status in ManagerSupport for PAC file UploadTricipher / Websense Authentication ServiceFiltered Location? 2009 Websense, Inc. All rights reserved.Basically a public (unique) ip address (or range) that defines a customer location where on premise filtering occurs.Primary use is to determine when a given client is not on their corporate network (and requires filtering)Also can be used to identify failed on premise filtering.NTLM Authentication will only be performed for filtered locations.Users / subnets who never intend to use hybrid filtering or the PAC file are not required ???Hybrid Explicit ProxyExplicit Proxy? 2009 Websense, Inc. All rights reserved.UI ChangesUpdates for Roaming User ConfigurationSupport for Customer Block Page ConfigurationSupport for smaller block pageSupport for Sync Service Status in ManagerSupport for PAC file UploadTricipher / Websense Authentication ServiceHybrid Explicit Proxy? 2009 Websense, Inc. All rights reserved.For a given filtered location, any explicit proxy for that location needs to be identified for the PAC file generation.For the purposes of configuration – the proxy ip address is explicit proxy ip address that the clients use. (So this will likely be private IP address, internal hostname.) Not used to identify roaming users.Hybrid Unfiltered D? 2009 Websense, Inc. All rights reserved.UI ChangesUpdates