变力弹簧支吊架安装导说明书(11版)中英文对照.docxVIP

September 2010 | 江蘇焱鑫科技股份有限公司 | 0510Jiangsu Yanxin Science Technology Incorporated Corporation 管道支吊架安裝指導說明書之—— Installation Instructions for Piping Support and Hanger 變力彈(碟)簧支吊架說明書 Instructions For Variable (Disc) Spring Support And Hanger  1. 安裝前注意事項Notes before Installation 管道支吊架安裝的基本要求是：按圖安裝，精心調整，嚴格檢驗。 As minimum requirements, the piping support and hanger shall be installed as per drawings and adjusted carefully. And strict inspection is also necessary. 按圖安裝，就是支吊架零部件型式、規格和材料的選用，支吊架的定位、安裝和調整都應按照支吊架組裝圖或支吊架型式圖或支吊架明細和安裝指南進行。 Besides selection for element type, specification, material of spring support and hanger, location, installation and adjustment of spring support and hanger shall be as per the requirements of assembly drawing, structural plan and installation instruction. 精心調整，就是在支吊架組裝後，應按照設計圖紙和有關技術規範，對支吊架及其零部件的位置、連接、荷載等方面進行細緻的調接和調整。 After assembly, all aspects of spring support and hanger and elements, such as location, connection, load and so on shall be adjusted carefully as per design drawings and related technical specification. 嚴格檢驗，就是在安裝前對支吊架零部件和材料的產品品質進行嚴格驗收；在安裝後、水壓試驗後和投入運行時對每個支吊架進行嚴格檢查並認真記錄。 Before installation, the product quality of elements and materials of spring support and hanger shall be inspected strictly. Each spring support and hanger shall be examined and recorded carefully after installation, hydraulic test and running. 另，變力彈簧支吊架安裝前，首先應該核對彈簧組件銘牌所示的管線代碼、吊架編號、型號、規格、彈簧整定載荷及熱位移量和方向是否與設計檔相符。在銘牌上貼有藍色箭頭”C”指示冷態荷載位置，它應與彈簧壓蓋上的指示線（箭頭）持平；紅色箭頭”H”指示理論熱態位置。 Besides, before installation of variable spring support and hanger, the line number, hanger number, type, specification, spring setting load and hot displacement and direction indicated on the nameplate shall be checked to see if they have met the design requirements. Blue arrow ”C” shall be attached to the nameplate to indicate cold load location, and it shall be flushed with the indicated line (arrow) on the spring gland. The red arrow ”H” represents theoretical hot state location.