《机械设计基础》课程补考复习资料.docVIP

《机械设计基础》课程补考复习资料 一、填空题 1、变形固体的形式很多，进行简化后，大致可归纳为_________、_______、________和________四类。。BC的受力图。 C F A B 12．已知在某二级直齿锥齿轮一斜齿圆柱齿轮传动中，1轮为驱动轮，3轮的螺旋线方向如图所示。为了使II轴轴承上所受的轴向力抵消一部分，试确定1轮的转动方向。并将各轮轴向力Fa1、Fa2、Fa3、Fa4的方向、4轮的螺旋线方向和1轮的转动方向标在图中。 三、计算题 13、一钢质拉杆承受载荷F=20kN，若材料的许用应力〔σ〕=100Mpa，杆的横截面为矩形，且b=2a，试确定a与b的最小值。 14.已知一对外啮合标准直齿圆柱齿轮传动的标准中心距a=108mm,传动比i12=3,小齿轮的齿数z1=18。试确定大齿轮的齿数z2、齿轮的模数m和两轮的分度圆直径、齿顶圆直径。 15．在图示轮系中，已知各轮齿数为：z1=60，z2=15，=30，z3=105，z4=35，z5=32.试求传动比i15，并说明轮1和轮5的转向是否相同。 16、试求右图所示杆1-1，2-2，3-3横截面上的轴力。已知F1=40kN，F2=30kN，F3=20kN。 《机械设计基础》课程补考复习资料参考答案 一、填空题： 1．杆件 板 壳 块 2. 大小 形状 3. 、载荷 截面尺寸 材料 工作条件 4.急回特性 5. 6．上下表面 7.小 8. 9.蜗轮 10.两轴 二、分析题： 11（略） 12． 三、计算题： 13、a≥10mm b≥20mm 14、 15. 16、）5、FN1=50kN FN2=10kN FN3=30kN forces to lead the economic responsibility auditing system, it is the whole party, the whole army pressure to fight corruption and demands of the times. Build a lasting, effective fire auditing mechanisms in the field of law enforcement, strengthening the construction of fire protection standardization of law enforcement, eliminate law enforcement corruption from the origin has a very good role in pushing hands, to create a firefighting force exercise self-discipline, strict with the right atmosphere. On the educational practice of the mass line of the party summary the Assembly stressed: party cadres were public servants, shall act in the interest of the institution, both cheap and often, and is clean and the Director-General. Honest and diligent complement each other integral elements, keep clean and capable will be tested good leaders an important yardstick. 　　Fire-fighting force of party members and cadres must bear in mind that public servants at all levels responsibility, hard work, dedication, and effort to fulfil their responsibilities and obligat