GSM测量讲解.pptVIP

In a SACCH frame, composed by 104 Frames, frames 52 to 59 shall be transmitted and used by the MS / BTS to assess the Level and Quality of the connection.Finally 12 out of 104 is sent so DTX samples are less realiable. The information about DTX UL is broadcast on BCCH in System Info 3 (Cell Options) and indicates that The MS MAY use Uplink Discontinuous Transmission The MS SHALL use Uplink Discontinuous Transmission The MS SHALL NOT use Uplink Discontinuous Transmission Same effect of the Weighting is on the Quality processing. │ 0 0 0 The MS may use uplink discontinuous │ │ transmission on a TCH-F. The MS shall not use │ │ uplink discontinuous transmission on TCH-H. │ │ │ │ 0 0 1 The MS shall use uplink discontinuous │ │ transmission on a TCH-F. The MS shall not use │ │ uplink discontinuous transmission on TCH-H. │ │ │ │ 0 1 0 The MS shall not use uplink discontinuous │ │ transmission on a TCH-F. The MS shall not use │ │ uplink discontinuous transmission on TCH-H. │ ? NOKIA BSSPAR FOR S9/ 03.04.2000 / Cellular Network Planning page: 1 Copyright ? NOKIA NETWORKS MEASUREMENTS AND MEASUREMENT PROCESSING BSSPAR S9 MEASUREMENTS Contents 1. Coding Level and Quality 2. MS Measurements in Idle Mode 3. MS Measurements in Dedicated Mode MEASUREMENTSCoding of Level and Quality LEVEL QUALITY P (dBm) FS (dBuV/m) LEV -110 27 0 -109 28 1 -108 29 2 . . . . . . . . . -49 88 61 -48 89 62 -47 90 63 BER (%) BER (%) QUAL RANGE MEAN 0.2 0.14