伺服阀的参数介绍.docxVIP

SV00 - 3 position 4 port hydraulic servovalve三位四通液压伺服阀DescriptionSV00 is a simple submodel of a 4 ways 3 positions hydraulic servo-valve.SV00S是个简单的三位四通液压伺服阀The spool dynamics is modeled as a 2nd order system with a specified natural frequency and damping ratio.线轴动力学建模为二阶系统与一个指定的固有频率和阻尼比For each of the 4 possible flow paths in the central position :在中位的四个可能的流量路径：P to A, P to B, T to A and T to Ba flow rate in L/min and a corresponding pressure drop in bar must be specified for the path fully open. Also the critical flow number for transition between laminar and turbulent flow characteristics must be given for each flow path. Normally this dimensionless number can be left at the default value.流量（L/min）和对应的压降（bar）必须是在阀口全开的情况下。层流和湍流流动特性临界流数之间的过渡必须给每个流路径。通常这个无量纲数可以留下作为默认值。A deadband region can be specified. In this deadband it is assumed that for each flow path there is no flow.可以指定一个死区。在这死区假设对于每个流量路径没有流量。For the two other positions, the flow paths are :from?P?to?A?and from?B?to?T?in the left blockfrom?P?to?B?and from?A?to?T?in the right blockExternal variables外部参数TitleVariable nameUnitTypeIn/OutDefault valuePort 11? flow rate at port PqpL/minbasic variableoutput-2? pressure at port Pppbarbasic variableinput-Port 21? flow rate at port TqtL/minbasic variableoutput-2? pressure at port Tptbarbasic variableinput-Port 31? flow rate at port BqbL/minbasic variableoutput-2? pressure at port Bpbbarbasic variableinput-Port 41? flow rate at port AqaL/minbasic variableoutput-2? pressure at port Apabarbasic variableinput-Port 51? input signal（输入信号）signullbasic variableinput-Internal variables内部参数TitleVariable nameUnitTypeDefault value1? fraction spool position分数阀芯位移xnullexplicit state显示状态02? fractional spool velocity分数阀芯速度v1/sexplicit state03? port P flow coefficient (Cq)P口流量系数cqpnullbasic variable-4? port P flow number (lambda)P口的流数Lambdap（λ）nullbasic variable-5? port P mean fluid velocityP口的流体速度flvpm/sbasic variable-6? port P cross sectional areaP口的横截面积areapmm**2basic variable-7? p