苏州物位压力产品及生产体系.ppt

APC Suzhou APC Suzhou APC Suzhou, Insert footer information APC物位/压力生产中心 APC-李建 Aerophoto Product Centre Maulburg Production sites abroad Production sites aboard E+H Level and Pressure production in China APC Suzhou - Organization Structure 组织机构 Production Summary - Level Cerabar M – Product Family 静压式液位计 Production Capacity 周产能 (不加班) 压力生产 : 750 物位生产 : 800 年产能 ( 50 工作周) Pressure 37500 Level 40000 产量 见：quantity report 2012+年计划 生产设备 – 物位标定台 生产设备 – 压力标定台 生产设备 氩弧焊 高电压测试/内压测试/高静压测试 Production General Overview Station 1: Arranging Materials Station 2: Main Assembly The Entire assembly is combined it to a continuous workflow on one station. This includes the laser marking, assembly, high pressure test for deltabar S and parameterisation Station 2: Laser - marking Station 2: Main Assembly – Cerabar S / Deltabar S Station 2 : Main Assembly of Deltabar S (2) Station 2: High Pressure Test – Deltabar S Station 2: High Pressure Test (2) Station 3: Calibration Station 4: Final Assembly / Last Check / Packing Station 4: Packing Some more facts 生产流程 品质要求和人员安全 生产认证 瑞士SQS认证机构ISO9001-2000的质量管理体系认证 中国质量技术监督检验部门的型式批准证书和CMC计量产品生产许可证。 中国国家级仪表防爆安全监督检验站的NEPSI认证 欧洲TüV NORD防爆认证机构的ATEX认证 生产认证  Pressure Production - APC Suzhou APC Suzhou  Now the side flanges, together with the sensor get attached to the housing and the Deltabar S gets its typical body structure. The side flanges get attached to each other and enclose the sensor. The 4 bolts get fastened by a defined torque. This allows a continuous surveillance of the assembly. Pressure Production - APC Suzhou APC Suzhou For the Deltabar S it has come the time to be tested at high pressure. The overload pressure test is made in order to check the stability of the transmitters as a whole, but of the flanges in the main. The transmitters are attached to adapter fittings which push water to the sensor. The pressure during this test goes up to 280 bar / PN 160-version and 630 bar / PN 420-version. Press