轮胎流程与销售.docVIP

轮胎生产工艺流程The tyres Production Process Process One工序一：密炼工序 Process 密炼工序就是把碳黑、天然/合成橡胶、油、添加剂、促进剂等原材料混合到一起，在密炼机里进行加工，生产出“胶料”的过程。 Process is to mix materials,such as Carbon Black, Natural/Synthetic Rubber, Oil, Additive, Accelerator etc. together, and processing in the Internal Mixer, then get rubber film. 所有的原材料在进入密炼机以前，必须进行测试，被放行以后方可使用。密炼机每锅料的重量大约为250公斤。 All the materials should be test before send into Internal Mixer,after be permited then can be used. Every pot weight is about 250 kilograms in Internal Mixer, 轮胎里每一种胶部件所使用的胶料都是特定性能的。 The glue stock used in every kind of Rubber part have specific performance . 胶料的成分取决于轮胎使用性能的要求。 The rubber film composition depends on the tyre performance requirement. 同时，胶料成分的变化还取决于配套厂家以及市场的需求，这些需求主要来自于牵引力、驾驶性能、路面情况以及轮胎自身的要求。 At the same time, the rubber film composition change also depends on the related producer and market’s demand. This demand mainly comes from the traction, driving performance, road surface condition and tire own requirements 所有的胶料在进入下一工序—胶部件准备工序之前，都要进行测试，被放行以后方可进入下一工序。 All the rubber film should be test before going into next process, can be used in next process after be permited. Process Two工序二：胶部件准备工序 Preparing Rubber parts process 胶部件准备工序包括6个主要工段section。在这个工序里，将准备好组成轮胎的所有半成品胶部件，其中有的胶部件是经过初步组装的。 This process include six sections, in this process, all the semi-finished rubber parts of tyre will be prepared well. Some rubber parts is being initial assembled. 这6个工段分别为 The six sections is as following: Section One工段一：挤出Extrusion 胶料喂进挤出机头，从而挤出不同的半成品胶部件：胎面、胎侧/子口和三角胶条。 Put the rubber film into the xtruding machine, then we can get different semi-finished rubber components: the tread, the side wall and triangle strip. Section Two工段二：压延 Rolling 原材料帘线穿过压延机并且帘线的两面都挂上一层较薄的胶料，最后的成品称为“帘布”。 Raw materials cord thread through the rolling machine and both sides of cord thread can be put on a thin rubber material, and the finished product is called cord fabric. 原材料帘线主要有尼龙和聚酯两种 Raw materials are nylon cord and polyester two kind