Cutting tool.docVIP

Specialized end mills for finishing titanium 专用的钛合金精加工立铣刀 A new range of end mills within the CoroMill Plura family is specialized for aerospace components. These end mills are optimized for titanium alloys and finishing in deep pockets at high metal removal rates without vibration. CoroMill Plura（金刚铣）家族中的一系列新型立铣刀专用于航空航天零 件。这些立铣刀专为钛合金加工进行了优化，能够在高金属去除率下无振 动进行深型腔精加工。 Benefits益处 ? High accuracy高精度 ? Long tool life at high cutting data应用高切削参数时具有很长的刀具寿命 ? Makes it possible to finish deep down in pockets on thin-walled aerospace components without vibration使其能够在无振动的情况下深入到航空航天薄壁零件的型腔中进行精加工 Application应用领域 ? Finishing and semi-finishing精加工和半精加工 ? Deep pockets with corner radius带圆角的深型腔 ? Titanium alloys, up to 48 HRc钛合金，硬度最高为48 HRc ? Aerospace components, die and mould components航空航天零件、模具零件 For cutting data, use PluraGuide 09.2 order number C-2948-117. 关于切削参数，请参考PluraGuide 09.2序号C-2948-117。 Technical features技术特性 ? Neck to reach into deeper pockets优化颈部设计可达深型腔内部 ? Light cutting 50° helix angle for finishing 轻快切削精加工，50°螺旋角 ? Reliable solid carbide grades with multi-layered PVD可靠的整体硬质合金材质，具有多层PVD涂层 coating ? Extra length 5 x D with radius 6.35 mm (1/4 inch) 超大长度5xD，半径6.35mm（1/4 inch） ? Variable flute depth可变排屑槽深度 ? Kordell cutters with corner radius are available for Roughing可提供带圆角的Kordell刀具用于粗加工 Performance性能 Long tool life at high cutting data应用高切削参数时具有很长的刀具寿命 Finish machining of titanium alloy Ti-6Al-4V with CoroMill Plura采用CoroMill Plura（金刚铣）精加工钛合金 ae / Dc mm (inch) 0.5 / 25 (0.020 / 0.984) vc m/min (ft/min) 120 (394) fz mm/z (inch/z) 0.1 (0.004) Tool life, min 94 Neck for best reach Assortment End mill type Tool diameter, mm (inch) Shank zn Grade Catalogue ref: Rotating tools 2011 High feed 12 - 20 (0.472 - 0.984) Cylindrical 4 GC1620 D221 Roughing, semi-finishing 12 - 25 (0.472 - 0.984) Cylindrical with neck 4, 5 GC1620 D223 Kordell 16 - 25 (0.630 - 0.984) Cylindrical with neck 6, 8 GC1640 D239 刀具寿命，min 94 颈部可获得最佳可达性 产品种类 立铣刀类型 刀具直径， mm（inch） 刀柄zn 材质 样本参考： 旋