输土机起垄施肥的调整内容.docVIP

输土机起垄施肥的调整内容 全面掌握和熟悉机引起垄覆膜机的结构特征和技术性能,并能够熟练的操作和使用。其次,要特别了解机械的配套功率、转速、转动方式以及液压输出接口,正确选择相匹配的拖拉机,与拖拉机的联接应确保机组的纵向和横向稳定性良好,机组的纵向和横向应与地面保持水平状态。。。 A comprehensive grasp and familiar with machine laminating machine structure characteristics and technical performance of the ridge, and can skilled operation and use. Secondly, to know what the special mechanical form a complete set of power, rotation speed, rotation mode and hydraulic output interface, choose the tractor and matching the right connection with tractor unit shall ensure that the longitudinal and lateral stability is good, the unit of longitudinal and transverse should be level with the ground state... 使用前应对机具进行检查调整,检查项目主要有紧固件有无松动、丢失现象,转动机构运转是否灵活,有无卡滞现象,外露部件有无弯曲变形、碰撞损坏现象发生。第四,进地作业时,拖拉机进入地头后,缓慢放下机具,将地膜从卷轴上拉出30~50 cm长的预留地膜,并用土紧密压实、压平,工作之前应在输土槽内预先装入适量的压膜土,避免拖拉机刚起步而开沟铲未入土时,升运装置和输土槽内无土压膜。第五,拖拉机作业时,要求以i挡或者ii挡匀速前进,作业速度一般应控制在3~4 km/h,作业中严禁转弯或者倒退行驶,并防止施肥管堵塞。 Before use machine to check the adjusted, check whether there is any looseness on projects mainly include fasteners, lost phenomenon, rotating mechanism operates is flexible, with or without card lag phenomenon, have exposed parts without bending deformation, collision damage occurs. Fourth, into operations, tractor after entering fields, slow down machine, the pull from the mulch on the scrolls will be 30 ~ 50 cm long reserved mulch, and tight compaction, pressing it, should be in before work lose soil slot in just the right amount of soil film in advance to avoid the tractor has just started and not the grave furrower, elevator installation and lose soil groove coking pressure membrane. Fifth, when the tractor work, request to the I or ii even splits, operation speed is generally should be controlled in 3 ~ 4 km/h, it is forbidden to turn in homework or backward, and to prevent fertilization pipe plug. 机械作业中要保持起垄覆膜平直、覆膜严密,起垄高度宽度、施肥量、施肥深度应符合全膜覆盖农艺要求。第六,在地表不平整、土壤含水率变化的情况下,输送带和流土槽可能会出现壅土或者堵塞,此时可由人工采用木棍进行辅助疏导,以确保机组正常作业。第七,机组完成一个作业期后,要及时清除机具上的泥土及杂草,将机具擦洗干净,涂防锈油