嵌入式Linux通过DHCP自动获取IP地址的方法.docVIP

嵌入式inux通过DHCP自动获取IP地址1．? Networking? --- [*] Networking support Networking options? --- * Packet socket //添加.配置CONFIG_PACKET [ * ] IP: DHCP support //添加 [ * ] Network packet filtering replaces ipchains ? --- //添加，后面子选项可不选，配置CONFIG_NETFILTER 说明：若没选 * Packet socket, [ * ] Network packet filtering replaces ipchains ? --- 选项，在执行udhcpc命令时出现如下错误： ~ # udhcpc udhcpc v0.9.9-pre started udhcpc[208]: udhcpc v0.9.9-pre started FATAL: couldnt listen on socket, Address family not supported by protocol udhcpc[208]: FATAL: couldnt listen on socket, Address family not supported by protocol 2．? Busybox中添加以下选项： Networking Utilities? --- udhcp Server/Client? --- [] udhcp Server udhcpd //在此不作服务端，故不选。生成udhcpd命令 [*] udhcp Client udhcpc //生成udhcpc命令 [ ] Lease display utility dumpleases [ ]?? Log udhcp messages to syslog instead of stdout [ ]?? Compile udhcp with noisy debugging messages 3．? 从busybox的examples/udhcp/下copy ?simple.script文件到开发板/usr/share/udhcpc/下，并重命名为default.script，udhcp_0.9.8cvs座机电话号码.orig.tar.gz中也有这样的文件。 [root@localhost root]# vi usr/share/udhcpc/default.script #!/bin/sh # udhcpc script edited by Tim Riker Tim@Rikers.org [ -z $1 ] echo Error: should be called from udhcpc exit 1 RESOLV_CONF /etc/resolv.conf [ -n $broadcast ] BROADCAST broadcast $broadcast [ -n $subnet ] NETMASK netmask $subnet case $1 in deconfig /sbin/ifconfig $interface 0.0.0.0 ;; renew|bound /sbin/ifconfig $interface $ip $BROADCAST $NETMASK if [ -n $router ] ; then echo deleting routers while route del default gw 0.0.0.0 dev $interface ; do : done for i in $router ; do route add default gw $i dev $interface done fi echo -n $RESOLV_CONF [ -n $domain ] echo search $domain $RESOLV_CONF for i in $dns ; do echo adding dns $i echo nameserver $i $RESOLV_CONF done ;; esac exit 0 4．? udhcpc就可自动获取IP地址了，以下是执行udhcpc的输出信息： ~ # udhcpc udhcpc v0.9.9-pre started udhcpc[228]: udhcpc v0.9.9-pre started Sending discover... udhcpc[228]: Sending discover... Sending select for 192.168.1.109.