造船需交验项目.docVIP

船体交验项目Hull inspection items 船体钢板及型钢材质报告和外观检查 Material quality report visual examination for steel plate section. 主要铸锻件／船体焊接材料材质报告和外观检查 Material quality report visual examination for major casting forging/ hull welding material. 分段制作和船台大合拢结构完整性及焊缝表面质量检查 Structure integrity visual seam quality inspection for block fabrication/butt joint of shipway. 船台大合拢的无损探伤检查 Nondestructive inspection for butt joint of shipway. 载重线和水尺标志安装精度检查 Check of installation accuracy of loading line marks draft marks. 船体完工后总长、型宽、型深和龙骨板桡度测量 Measuring of overall length, molded breadth, molded depth and straightness of keel plate after completion of hull construction. 烟囱标志和船名标志安装正确性及完整性检查 Insp. of installation correction integrity for funnel marks and ship name marks. 放泻塞安装正确性和真空试验 Installation accuracy and vacuum test for sluice plug. 根据密性试验要求做船体密性试验 Tightness test for hull according to tightness test plan. 倾斜试验（仅为首只船）和轻载重量测量（为姊妹船） Inclining test (only for the first ship) and lightweight measuring(for sister ships) 二次除锈及涂装检验 Insp. for secondary derusting painting. 舵杆／舵销／舵柄／舵承等材质报告和加工检验 Material quality report and fabrication insp. for rudder stock/pintle/ tiller/carrier etc. 舵叶内部结构和表面焊缝检查 Inner structure and visual seam insp. for rudder blade. 舵杆、舵销、舵叶锥度和同心度检查 Taper and alignment insp. for rudder stock, pintle and blade. 舵杆、舵销与布丝间隙测量 Clearance measuring between rudder stock / pintle and bush. 舵止跳块间隙测量 Check for the gap of rudder jumping stopper. 舵系自动化及应急操舵试验 Automatic emergency steering effective test for steering gear system. 锚、锚链及其附件外观检查 Visual insp. for anchors, chains and accessories. 锚机及系泊设备安装正确性检验 Installation correction insp. for anchor windlass and mooring equipment. 锚系统运转、抛起锚及脱钩试验 Running, dropping, lifting and anchor tripper test for anchor system. 舷梯和绞车负荷及效用试验 Loading and effective test for acco. ladder and winch. 救生设备救生艇艇架安装及负荷试验 Liftboat davit installation and loading test for life-saving equipment. 救生艇和救助艇抛艇试验 Launching test for liftboat and rescueboat. 食品吊／软管吊／苏伊士运河