氯磺化聚乙烯底漆用途和使用说明.docVIP

  • 10
  • 0
  • 约4.62千字
  • 约 3页
  • 2017-06-08 发布于河南
  • 举报
氯磺化聚乙烯底漆用途和使用说明

氯磺化聚乙烯底漆Intended Uses 用途 广泛用于现代石油化工、用于天然气制碱、制酸、制盐等苛刻性介质腐蚀的设备,其他用 途包括化工建筑、化肥、发电、桥梁、化工管道、煤气罐、油罐、车间、贮罐墙面等,也可用于用于水利工程、水库、凉水塔、污水池、港口码头、船舶等方面设备防护,其中卓越的耐电化腐蚀和化学腐蚀性,独特的耐水性能、耐油性能、抗寒性能、良好的耐磨耐冲击性、柔韧性好、,附着力强等。 Widely applied to modern oil and chemical engineering, equipments which are used for harsh corrosive mediums such as alkali, acid, salt etc. Other application includes chemical building, chemical fibre factory, fertilizer plant, power, bridge, chemical pipeline, gas tank, oil tank, shop, storage and their wall etc. it may be used for protecting equipments embracing hydraulic works, reservior, cooling tower, sewage pool, wharf, ship, etc. It forms a coating with excellent resistance to electro-chemical and chemical corrosion, unique resistance to water, oil and cold, good performance to abrasion and impact, fair flexiblity and strong adhesinon etc. Product Description 产品简介 Multi-purpose primer, Iron red etc 多功能底漆,铁红色。 Product Information 产品数据 Volume Solids 固体份 35% Dry Film Thickness干膜厚度 30 microns equivalent to 85 microns of wet film 30微米相当于85微米湿膜厚 Theoretical Coverage 理论涂布率 10.2 m2 /Kg 10.2平方米/公斤 Practical? Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Application Details 施工详述 ? Mix Radio 混合比 One pack 单罐装 Airless Spray 无空气喷涂 Not Recommended?? ?不推荐采用 Brush or Roller 涂刷或辊涂 Recommended 推荐采用 Conventional Spray 传统喷涂 Recommended 推荐使用 Thinner 稀释剂 C001 Cleaner 油漆设备清洗剂 C001 Pot Life 使用期 Not limit 不限制 Storage 贮存期 One year 一年 Drying time 干燥时间 ? Substrate Temperature 底材温度,℃ Touch Dry 表干 (h) Hard Dry 硬干 H) Over coating Interval 覆涂间隔 Mix最短 Max最长 25 ? 0.5 24 2 h 5 d Storage and Handling 贮存与管理 Storage 贮存 Store in cool and dry conditions?? 贮存于阴凉干燥处 Pack size 包装规格 20g in 20 liter container 20斤装于20公升容器中 Flash Point??? 闪点 37 Specific Gravity 比重 Approx 1.15 Kg/L 1.15公斤/公升 Specification and Surface preparation 技术要求及表面处理 Steel surface: Blast to Swedish Standard Sa2.5 or be rust-removed manully or with power tool to Swedish Standard St3. 钢材表面:喷砂处理至瑞典标准St2.5或手工除锈或动力工具除

文档评论(0)

1亿VIP精品文档

相关文档