NIPOLIRforWebsiteMFS.pptVIP

NIPOL? IR  Polyisoprene Elastomer ZEON CHEMICALS L.P. Distributed by the R.T. Vanderbilt Company, Inc. * * 18 months 18 months 18 months 3 years 3 years 3 years Shelf life 75.0 75.0 75.0 38.6 77.1 77.1 Package size, lb) 34.0 34.0 34.0 17.5 35.0 35.0 Package size, kg Yes Yes Yes Yes Yes Yes FDA Compliant* 0.91 0.91 0.91 0.91 0.91 0.91 Specific Gravity 98.5 ~99.0 ~99.0 98.0 98.0 98.0 Cis-1,4 content, % Not reported Not reported Not reported -75 -75 -75 Tg, °C 3.0 3.0 3.0 Not reported Not reported Not reported Extractables, % 0.6 0.6 0.5 0.5 0.5 0.5 Ash, % max. 0.5 0.5 0.5 - - - Volatile matter, % Not reported Not reported Not reported 1.0 1.0 0.7 Heat loss, % max. 50-70 70-90 70-90 75-90 65-80 75-90 Mooney ML4 @ 100°C 9003-31-0 9003-31-0 9003-31-0 9003-31-0 9003-31-0 9003-31-0 CAS # Natsyn 2210 Natsyn 2205 Natsyn 2200 NIPOL IR 2200N NIPOL IR 2200L NIPOL IR 2200 Property NIPOL IR2200 = Standard grade for Tires and Industrial Products NIPOL IR2200L = Low Mooney Viscosity Grade NIPOL IR2200N = BHT-free type (antioxidant free) * All grades of NIPOL IR synthetic rubber comply with applicable portions of the following FDA regulations: 21CFR 175.105 Adhesives 21CFR 175.125 Pressure Sensitive Adhesives 21CFR 176.180 Components of Paper and Paperboard in contact with dry food. 21CFR 177.2600 Rubber articles intended for repeated use. Comparison of NIPOL IR and Natsyn? Polyisoprene NIPOL? IR vs. Natsyn? in a Furnace Black Loaded Compound Three NIPOL IR polymers of different viscosities were compared to Natsyn 2200 in a carbon black-loaded compound. The viscosities of the NIPOL IR polymers were slightly higher, while scorch and cure times for the NIPOL IR compounds were markedly slower, than those of Natsyn 2200. Press cures equated to tc 90 indicate that NIPOL IR 2200 has higher modulus and tensile strength. All three NIPOL IR polymers exhibited improved tear strength, compression set resistance and res