ProE建工程图标栏明细表格式使用方法.docVIP

ProE图文教程PROE建模及工程图,标题栏,明细表,格式使用方法 按照自己的国标、方式、习惯进行适当设置，以提高工作效率； 如：设置缺省的建模模板（默认是英制）　template_solidpart值设置为X:\proeWildfire3.0\templates\mmns_part_solid.prt 以及其它设置，如单位等，见下图注：配置文件config.pro一定要保存在PROE安装目录下的TEXT目录下，否则无效 （添加一些参数，以方便工程图的标题栏、明细表调用）图样名称———CNAME　材料标记———CMAT但我使用PTC＿MATERIAL＿NAME参数）阶段标记———CJDBZ（用户定义的参数）重量———CMASS　企业名称———QNAME方法：“工具”→“参数”→点右下角“＋”号→在名称列中输入参数名（如CNAME）→在类型列中选择类型（如字符串）→值为空→在说明列中输入简要的说明，以更自己识别）如下图 3、建立标题栏 ①把标题栏建立成表格，以更日后调用 ②标题栏中的参数一定要与你上面模板的参数一一对应，这样以后在建立工程图时，它才会自动获取零件中的相关数据，其中系统参数也是自动获取的，如比例、页码等 ③你也可以把企业名称参数还要直接用你单位的名称代替，这样以后就不用每次输入，同样，你也可以在设置模板在将QNAME的值设置成你单位的名称（推荐），这是一样的。 ④注意：要设置“旋转原点”在右下角，旋转原点将是你以后将此表插入的基点，方法：选中整个表格，再点右键→设置旋转原点→靠近你要设置原点线段附近点左键→会出现一小叉→OK见下图 Delegates, staff: Hello! in the run-up to the Spring Festival, we held one session of four staff representatives Conference 2013-workshop, full back in 2012, careful analysis of the current situation, discuss 2013 development plans. 　　Here, on behalf of my company 2013 work reports to the General Assembly, for consideration. 　　Pillar I, 2012 back in 2012, XX power companies adhere to the partys 17 great spirit for guidance, comprehensively implement the scientific concept of development, promoting cost-leadership strategy, standards, focus on implementation, lean management, continuously improve, smooth present safety situation of enterprise management, business management and control scientific and standardized, and the dedication of staff, manage a harmonious and democratic atmosphere of the good situation. Main indicators are as follows:-the battery indicator: power generation totaled 7.815 billion kWh, beyond the annual budget implementation capacity of 315 million kWh, an increase of 757 million kWh. 　　Sales totaled 7.425 billion kWh, exceeding sales of 330 million kWh the annual Executive budget, an increase of 729 million kWh. --Security measures: unplanned outages 2.5 times. 　　No personal injury accident occurred, no major accident and above, no maj