锡炉预防保养操作指示(精装版).docxVIP

作业指导书 Work Instruction编号Ref NOPage: 1 of 15现时变更版次Current RevisionN/A发行Issued确认Checked批准 Approved2签名Signature日期 Date型号Model所有型号通用All工序名称Process锡炉预防保养操作指示 Wave solder machine maintenance instruction原材料Material碎布、酒精、机油、黄油 rag、alcohol、lube、butter设备,工具,仪器Equipment,Tooling, Devices风枪、抹布、螺丝刀、除锈剂 fan gun、rag、screwdriver、the liquid of cleaning rust作业条件Condition室温 room temperature作业内容 Operating Content1. PURPOSE 目的:Bring up operation indicate that soldering prevent maintenance operation, protect soldering maintenance work from correct implement.对锡炉预防保养提出操作指示,保障锡炉保养工作正确执行.2. SCOPE范围:This procedure is applicable for all wave soldering machine for Flextronics (XiXiang) Co.Ltd.此指示适用于所有……….有限公司生产在线使用的波峰焊锡炉3.DEFINITION定義:A The part of needing to replace检查后需更换的配件B The part of needing to replace after checking定期需更换的配件4. REFERENCE參考文件:Wave soldering operation specification波峰焊锡炉操作说明书.5.RESPONSIBILITY职责:Request soldering technician to prevent maintenance according to operation indicate.要求锡炉技术员按操作指示对锡炉进行预防保养.6.PROCEDURE程序:6.1. Set up soldering prevent maintenance operation procedure.建立锡炉预防保养操作程序.6.1.1. Daily maintenance subject 日保养工作6.1.1.1. Clean the soldering dross of the wave nozzle and soldering both, and ensure the solder level is between the high mark and the low mark on the solder pot. Otherwise, add solder bar and record the result into PSTX-PCME-WI-056 enclosed form 01 (01) page2 in time.控制项目Control PointN/A项目Item规格Spec控制方法Method本工程检查频率Process Frequency品质QualityN/AN/AN/AN/A工艺Process ParameterN/AN/AN/AN/A安全作业要点Safety Control Point保养时要切断电源，留意不要烫伤。同时注意酒精等易燃物品离开锡缸，预热区三米以外，以防火灾。环境保护要点EnvironmentControl Point废抹布、废松香水渣、废锡渣按环保指引投放到相应的垃圾桶内。 Company Restricted作业指导书 Work Instruction编号Ref NOPage: 2 of 15现时变更版次Current RevisionN/A发行Issued确认Checked批准 Approved2签名Signature日期 Date型号Model所有型号通用All工序名称Process锡炉预防保养操作指示 Wave solder machine maintenance instruction原材料Material碎布、酒精、机油、黄油 rag、alcohol、lube、butter设备,工具,仪器Equipme