毕业设计（论文）-于单片机的直流电压源的设计.docVIP

中原工学院信息商务学院课程设计 基于单片机的直流电压源的设计 摘 要 本文主要论述了一种基于AT89S52单片机为核心控制器的数控直流稳压电源的设计原理和实现方法，其主要由辅助电源、显示电路、控制电路、稳压电路和模数转换电路五部分组成。 该系统原理是以AT89S52单片机为控制单元，以模数转换芯片TLC1534对采样值进行转换为数字信号。辅助电源提供各个芯片、数码管和放大器所需工作电压，显示电路用于显示电源输出电压的大小，输出电压值可通过按键对其进行步进（±0.1V），并且在按键长时间按下的时候能连续增加或减小。与传统的稳压电源相比具有操作方便，电源稳定性高以及其输出电压大小采用数码显示的特点。该系统具有抗干扰性能好，可靠性高，及最终输出电压值与真实显示值精确度较高等优点。 关键词: 数控直流稳压电源 AT89C51 TLC1543 Design of Digital Power source Abstract The method of this paper based on the AT89C51 microcontroller core of the numerical controller DC power supply design theory and realization. The digital DC power supply from the analog power, display circuit, control circuit, regulator circuit and analog-to-digital converter circuit composed of five parts. Analog power supply to provide the various chips, digital amplifier control and the required operating voltage, display circuit for displaying the size of power supply output voltage, output voltage value may be stepping through the control button (± 0.1V), and a long button press when under the continuous increase or decrease. And compared to the traditional regulated power supply with easy to operate, high power stability, as well as the size of the output voltage characteristics of the use of digital display. This system has the resistance to interference well, the reliability is high, and finally output voltage value and real demonstration value precision higher merit. Key words: Digital DC Voltage-stabilized Power Source AT89S52 TLC1543 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc264380122 摘 要 PAGEREF _Toc264380122 \h I HYPERLINK \l _Toc264380123 Abstract PAGEREF _Toc264380123 \h II HYPERLINK \l _Toc264380124 绪论 1 HYPERLINK \l _Toc264380125 1 直流稳压电源 1 HYPERLINK \l _Toc264380126 1.1 直流稳压源概述 1 HYPERLINK \l _Toc264380127 1.1.1 直流稳压源的定义 1 HYPERLINK \l _Toc264380128 1.2 方案的比较与选择 1 HYPERLINK \l _Toc264380129 1.2.1 传统直流稳压源 2 HYPERLINK \l _Toc264380130 1.2.2 数控直流稳压电源 2 HYPERLINK \l _Toc264380131 1.2.3 方案的最终选择 3 HYPERLINK \l