毕业设计（论文）-冠Pour_Cam_32轿车发动机盖锁设计.docVIP

各专业完整优秀毕业论文设计图纸 摘 要 汽车发动机盖锁属于发动机盖的附件，是具有独立功能的部件。其功能旨在使其安全锁闭，并保证发动机盖与车身的相对位置在行车中不得自动开启，以保证驾驶员的视野不被挡住。本次课题研究的对象是皇冠PourCam32轿车发动机盖锁，该零件是卡板锁，采用辅助挂钩与卡板双重锁紧机构，使用可靠，不易自动脱开。 通过了解发动机盖锁结构和工作原理，对其进行整体布置以及三个重要弹簧的布置和二次锁止位置的布置等。为了保证三个弹簧的正常工作，对它们的主要参数进行了设计计算,经过验算，其主要参数满足设计的要求，即在弹簧受力情况下不会产生失效情况。 发动机盖锁各零件主要是冲压而成的，总共完成9个主要零件的建模，比如锁体，卡板等等。然后通过不同的装配方式完成了发动机盖锁的总装配。通过UG的运动分析模块对发动机盖锁进行运动仿真分析，可以得出各机构在运动过程中不产生干涉，满足发动机盖锁的工况，并输出MPEG文件。 本次课题设计，主要的研究理念是在研究汽车发动机盖锁的结构和工作原理的基础上，通过综合运用汽车专业知识和计算机辅助设计技术（UG软件），完成轿车发动机盖锁设计。 关键词：发动机盖锁，布置，建模，装配，运动分析，UG Design of the Hood Lock of Royal Crown Pour Cam 32 Automobile ABSTRACT The automobile hood lock is an accessory of the automobile hood, which is a part to have the independent function. Its function is to make its safety lock shut, and guarantees the automobile hood not to open automatically relative to the position of the body in driving, in order to guarantee the drivers eye shot not to be turned back. The investigative object of this thesis is the automobile hood lock of Royal crown Pour Cam 32 car. It is a chuck lock which is a dual lock organization adopting the assistance hook and the chuck and is dependable to use and uneasily looses. By understanding its construction and work principle, the thesis introduces the integral arrangements of the automobile hood lock, the arrangements of the three important pull springs and the arrangements of the two locked positions. It should design and calculate the main parameters of the three pull springs to promise them to work normally. After checking, the main design parameters meet the requirements that the springs would not fail under the force. The parts of he automobile hood lock is made by stamping. It is finished nine main parts modeling, such as lock body and so on. It realizes the three-dimensional emulations by the motion module of the UG software to ensure all the organizations not to be intervened when the automobile hood lock is working in order to meet the working conditions then o