毕业设计（论文）-微夹杂对德龙铸坯裂纹的影响.docVIP

PAGE 学 号：200506010116  HYPERLINK  H 毕业论文 GRADUATE THESIS 论文题目：显微夹杂对德龙铸坯裂纹的影响 学生姓名： 专业班级：05钢1 学 院：冶金与能源学院 指导教师： 教授 20 河北理工大学 毕业论文摘要 PAGE 31 摘 要 钢中的非金属夹杂物是影响钢材质量的重要因素之一，夹杂物对钢的力学性能、工艺性能和机械性能都存在不利影响，尤其对铸坯的裂纹具有重要的影响，研究发现夹杂物是许多铸坯裂纹产生的起点。非金属夹杂物对铸坯裂纹的影响不仅取决于夹杂物类型，而且与其组成、形态、数量、大小及分布等因素密切相关。 本课题根据邢台德龙钢铁公司的生产工艺流程，通过对样品金相、电镜和能谱分析等方法，对铸坯内夹杂物的数量、类型、粒度做了详细的统计。本课题着重从显微夹杂对铸坯裂纹的影响方面进行了研究并提出了改进措施，优化生产工艺，最终达到改善铸坯裂纹发生状况，研究具有很强的实际意义。 关键词: 非金属夹杂物；裂纹；铸坯 ABSTRACT The non-metallic inclusions in steel is one of the important factors which impact the quality of the steel, including the dynamics properties, process and mechanical properties of the steel, particularly for billet cracks have a major impact, the study found that inclusion were the starting point ofthe billet cracks.The impact of non-metallic inclusions on billet cracks depends not only on the type of inclusions, but also on its composition, shape, quantity, size and distribution. This issue in accordance with Xingtai Delong Iron and Steel Companys production process, statistics the number, type, size of the inclusion in detail with the metallographic microscope, electron microscopy and energy spectrum analysis.From the impact of micro-inclusions on the billet crack this issue study and propose measures to improve and optimize the production process, attain the ultimate objective of improving the situation of the billet cracks, and the research has a strong practical significance. Keywords: non-metallic inclusions; crack; billet 河北理工大学 毕业论文目录 目　　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc233100617 引 言 PAGEREF _Toc233100617 \h 1 HYPERLINK \l _Toc233100618 1 文献综述 PAGEREF _Toc233100618 \h 2 HYPERLINK \l _Toc233100619 1.1钢的纯净度和产品质量 PAGEREF _Toc233100619 \h 2 HYPERLINK \l _Toc233100620 1.1.1钢的连铸技术发展 PAGEREF _Toc233100620 \h 2 HYPERLINK \l _Toc233100621 1.1.2连铸对钢水纯净度的要求 PAGEREF _Toc233100621 \h 2 HYPERLINK \l _Toc233100622 1.2连铸坯的生产 PAGEREF _Toc233100622 \h 2 HYPERLINK \l _Toc233100623