美国GEOCOMP应力路径三轴仪.docxVIP

美国GEOCOMP应力路径三轴仪简介用途：Geocomp静三轴与应力路径三轴可以全自动完成土的应力路径试验。将试样安放后，设置好试验参数，然后所有过程均由系统自动完成。该系统通过软件自动完成试验初始化设置、饱和试验、固结(各向同性、各向异性或K0)和应力路径（剪切）试验。环球香港科技有限是美国GEOCOMP在中国的唯一的独家。概述：LoadTrac II/FlowTrac II系统采用高速、精确的微步进马达对试样施加轴向荷载和压力。包括一个施加轴向压力的荷载架、一个控制围压的液压泵和一个控制反压的液压泵。该系统可以在0.00003 ~ 15mm/min之间任意位移速度施加恒定速率应变。特点：通过网络通讯模块和相关的软件，可以在一台计算机上自动控制试验过程、采集和实时显示数据、生成试验报告。技术参数：加载能力22 kN, 45 kN, 90kN位移速率控制范围0.00003 ~ 35mm/min流速范围0.000006 ~ 3cc/sec?体积250cc, 750cc压力1400kPa, 3500kPa?压力分辨率量程的0.005%?最大试样直径305mm?尺寸LoadTrac II: 464 x 546 x 1206mmFlowTrac II: 203 x 406 x 470mm?重量LoadTrac II: 55kgFlowTrac II: 14kg?电源110/220V，50/60Hz，单相The LoadTrac II/FlowTrac II system for triaxial testing fully automates the conduct of CU, CD and any possible stress path triaxial test on soils. Once a soil sample is in place, and the test conditions are selected, the LoadTrac II/FlowTrac II system will run the entire triaxial test from start to finish. This system is operated by software which automates the initialization, saturation, consolidation (isotropic, anisotropic or Ko) and shear phases of the test. The system comes as a complete, self-contained unit with all of the equipment requiredto perform fully automated triaxial and stress path tests. The LoadTrac II/FlowTrac II system utilizes high speed, precision micro stepper motors to apply the vertical load and pressures to the soil specimen. It includes one load frame for vertical stress, one flow pump for cell pressure and one flow pump for back pressure. The sys-tem is capable of applying a constant rate of strain at any displacement rate from 0.00003 up to 15 mm per minute (0.000001 to 0.6 inches per minute). Sensor readings are displayed in SI or English units and stored in memory. With the network communications module and appropriate software, the entire test can be automatically controlled, data captured and displayed in real-time, and test reports prepared on a PC. Optional software running in Windows? 2000, XP, or Vista completely automates running the