排烟计算.docVIP

Flue gas volume designing process and result烟气量计算过程及结果 MF: According to consume of the natural gas is 950Nm3/hr., main flue gas volume will be about 10830Nm3/hr. (950*11.4), the temperature will be about 800 degree centigrade through the heat exchanger. So the working condition volume will be about 39660m3/hr., calculated in accordance with the exhaust speed 2.5 Nm3/s (natural exhausting), getting the main flue gas pipe dimension (bore dimension): φ1200mm. 根据天然气的总消耗量950 Nm3/hr.计算，主排烟的烟气生成量大约为10830Nm3/hr.，废气经过换热器后温度约为800摄氏度，所以工况下主排烟烟气量约为39660m3/hr.，按照2.5 Nm3/s的排烟速度计算得出，熔铝炉主烟道尺寸（内径）为φ1200mm。 There is one dust hood on melting furnace, and the dimension is about (L*W) 9.5m*1.5m. Calculated in accordance with the speed in the door area m/s, While the door is completely open, the dust volume will be about 41040Nm3/hr. (9.5*1.5*0.8*3600), the temperature under the hood is about 80 degree centigrade, so the working condition volume will be about 49444m3/hr., calculated in accordance with the exhaust speed 15Nm3/s, getting the door flue gas pipe dimension: φ1120mm. 熔铝炉有一个炉门收尘罩，其开口尺寸约为9.5m×1.5m。 当炉门完全打开时，按照炉门区域m/s的速度来计算，收尘罩入口的烟气量约为Nm3/hr.，此区域烟气温度约为0摄氏度，所以工况下总烟气量约为m3/hr.，按照15 Nm3/s的烟管排出速度计算得出，熔铝炉炉门收尘管径为φ1120mm。 HF: According to consume of the natural gas is 330Nm3/hr., main flue gas volume will be about 3762Nm3/hr. (330*11.4), the working condition temperature will be about 950 d egree centigrade. So the working condition volume will be about 15702m3/hr., calculated in accordance with the exhaust speed 2.5 Nm3/s (natural exhausting), getting the main flue gas pipe dimension (bore dimension): φ700mm. 根据天然气的总消耗量330 Nm3/hr.计算，主排烟的烟气生成量大约为3762Nm3/hr.，工况下排烟温度约为950摄氏度，所以工况下主排烟烟气量约为15702m3/hr.，按照2.5 Nm3/s的排烟速度计算得出，保温炉主烟道尺寸（内径）为φ700mm。 There is one dust hood on holding furnace, and the dimension is about (L*W) 7.5m*1.5m. Calculated in accordance with the speed in the door area m/s, While the door is completely open, the dust volume will be about 32400Nm3/hr. (9.5*1.5*0.8*3600), the t