漳村变电站电气部分设计.docVIP

摘 要 随着社会的发展，点已经成为我们生活中最不能缺少的一部分，在生产生活中起着至关重要的作用。因此，国家对电的投入、发展十分重视。现今，我国的电网虽然是日趋完善，但是，矿井的供电部分却依然不完善，在变电站的设计部分也仍然有很多急需解决的问题。该设计主要就是针对矿井的供电特殊性，根据所学知识进行一次全面系统的设计。 文中以漳村煤矿变电站电气部分设计为主体，主要内容包括一次部分和二次部分的电气设计。首先对国内外变电站发展状况进行了初步的介绍，采用需要系数法对变电站的负荷进行分析与计算，确定无功功率补偿装置及无功补偿容量，根据设计任务书所提供的原始资料对变电站布局，确定变电站的负荷中心。利用负荷计算的结果选择变压器的台数和容量，从而确定变电站的主接线方式，然后用标么值法对变电站进行短路电流计算，根据短路电流计算表选择变电站的导线及高低压电气设备，并对它们进行校验。二次部分主要内容包括对变压器、线路继电保护整定、防雷与接地的设计。 关键词：?????? ABSTRACT With the development of current society, has become almost in our lives indispensable part, plays an important role in peoples production and life. Therefore, our country on the electrical input gave high attention. Nowadays, the grid of our country although is perfect with each passing day, but, in mine power supply system still exists many problems. In the part of substation design still has many urgent problems, the design is mainly in view of the particularity of mine power supply, according to the knowledge of a comprehensive system design. This paper in Zhangcun coal mine substation electrical part design as the main body, main content including a part and the second part of the electrical design. The first substation to the domestic and foreign development status were preliminary introduction, is analyzed and calculated by need coefficient method of substation load, to determine the reactive power compensation device and the reactive power compensation capacity according to the design task book provides original data layout of substation, the substation load center. The load calculation results select the number and capacity of transformers, substations to determine the main wiring mode, and then use standard? Value method of substation, the short-circuit current calculation, according to short-circuit current calculation table select substation conductors and high and low voltage electrical equipment and to check. The two part of the main content of the transformer, line relay protection setting, lightning prote