type steel processes an equipments.docVIP

type steel processes an equipments 9.4.3.1The half automatic flame incises machine 1, equipments name:The half automatic flame incises machine 2, model number:CG1-100 3, function:The steel plate bottom anticipates, opens an ascent, the equipments is small, easy to move, Be mainly used for incising square, rule of small reach a piece, beat a steel plate ascent 9.4.3.2The type set signs machine 1, equipments name:The H type set signs machine 2, specification, model number:HG-1500 3, function:Mainly used for a H steel set to sign, the wing plank width 90-800 mms, stomach plank height 300-1500 mms 9.4.3.3Type in the door automatically covers up the machine of Hu Han 1, equipments name:Type in the door automatically covers up the machine of Hu Han 2, model number:MZ-1-1250A 3, function:Used for a H type steel combination to weld, can carry on the H type steel that reaches the biggest piece noodles 700 mm × 1500 mms to weld; 9.4.3.4The type steel corrects machine 1, equipments name:The type steel corrects machine 2, model number:KY600BS 3, function:Used for correct the work word steel or H type steel wing good luck plank in the process of welding in of transform, accuracy3 mms|10 ms.The H steel wing good luck is clean, didnt press a scar, the wing plank width 200-650 mm wing plank thickness 6-55 mms, stomach plank high ≥ 250 mms 9.4.3.5AMADA is 3D to drill 1, equipments name:AMADA is 3D to drill 2, model number:GBH 1000 Ⅱ 3, function:Is main to drill a hole to the auto that the wing plank stomach plank of H type steels carry on a high speed degree, own sophistication diagraph system and software and H steel marking system, can process beam stomach width:148-1025 mms, the good luck is high:75-500 mms, the principal axis counts 7 stalks, beam stomach plank thick 4.5-30 mms, the good luck plank thickness 7-50 mms moves to send the weight the 50 KNs and processes bore path:Link bore 14.5-32 mms. 9.4.3.6The AMADA number controls lie type band saw (1)Equipments name:The AMADA