ros桥接限速.docVIP

modified on 25 June 2009 at 07:13 ??? 102,654 views TransparentTrafficShaper From MikroTik Wiki Jump to: navigation, search Contents [hide] 1 Introduction 2 Quick Start for Impatient 3 Explanation 3.1 Bridge 3.2 V3 3.3 Mangle 3.4 Queues Introduction This example shows how to configure a transparent traffic shaper. The transparent traffic shaper is essentially a bridge that is able to differentiate and prioritize traffic that passes through it. Consider the following network layout: We will configure one queue limiting the total throughput to the client and three sub-queues that limit HTTP, P2P and all other traffic separately. Quick Start for Impatient Configuration snippet from the MikroTik router: / interface bridge add name=bridge1 / interface bridge port add interface=ether2 bridge=bridge1 add interface=ether3 bridge=bridge1 / interface bridge settings set use-ip-firewall=yes / ip firewall mangle add chain=prerouting protocol=tcp dst-port=80 action=mark-connection \ new-connection-mark=http_conn passthrough=yes add chain=prerouting connection-mark=http_conn action=mark-packet \ new-packet-mark=http passthrough=no add chain=prerouting p2p=all-p2p action=mark-connection \ new-connection-mark=p2p_conn passthrough=yes add chain=prerouting connection-mark=p2p_conn action=mark-packet \ new-packet-mark=p2p passthrough=no add chain=prerouting action=mark-connection new-connection-mark=other_conn \ passthrough=yes add chain=prerouting connection-mark=other_conn action=mark-packet \ new-packet-mark=other passthrough=no / queue simple add name=main target-addresses=2/32 max-limit=256000/512000 add name=http parent=main packet-marks=http max-limit=240000/500000 priority=1 add name=p2p parent=main packet-marks=p2p max-limit=64000/64000 priority=8 add name=other parent=main packet-marks=other max-limit=128000/128000 priority=4 Explanation Each piece of code is followed by the explanation of what it actually does. Bridge / inter