斗式提升机设计业设计.docVIP

斗式提升机设计 [摘要]我的设计是对斗式提升机进行设计。从设计的要求出发，我们要把材料竖直着向上传输，我经过查资料把传输速度定为0.8m/s，传送的量是128t/h。要求是我的设计更加能够对问题进行合理的解决，能更好的处理问题，能够使操作更加的简易，更加便于操作，能更好的提升工作的效率并且使我们的生产成本降低，在方便安全可靠的条件下，设计成一个人就可以操作的简易机械。这样就可以更好的降低人工成本，使总的成本降低，提高产能。 我的这几主要包括以下这几个方面的内容。（一）相关资料的查找（二） 相关初始数据的计算；（三）总体方案的拟定；（四）驱动轴的设计与计算（五）料斗的设计与计算（六）环链的设计与计算（七）链轮的设计与计算。 [关键词] 斗式提升机、料斗、链轮、配重块、电动机 ABSTRACT [Abstract] my design is to design the bucket type lifting machine. From the requirements of the design of, we need to keep material vertical upward transmission, I through to find information on the transmission speed of 0.8m/s, transferred amount is 128t/h. Requirement is my design work to the problem of reasonable solution, can better deal with the problem, can make the operation more simple, more convenient operation, can better enhance the work efficiency and make our production costs are reduced in a convenient, safe and reliable conditions is designed into a person can operate simple machine. So you can better reduce the labor cost, the total cost reduction, increase production capacity. My this mainly includes the following several aspects of this content. Design and calculation of the search for relevant information; (II) related to initial data of the calculation; (3) the overall scheme of the protocol; (IV) drive shaft design and calculation (5) hopper (6) ring chain design and calculation of sprocket (7) the design and calculation. [keyword] bucket elevator, hopper, sprocket, counterweight, motor  目录 第1章 绪论 ...............................................1 1.1斗式提升机的发展史和特点............................2 1.2斗式提升机的分类....................................2 1.3课题主要工作任务....................................2 1.4斗式提升机的主要设计方案...........................3 第2章 概述...............................................4 2.1 斗式提升机装载和卸载...............................4 2.2常用斗提机选用及相关计算............................5 2.3斗式提升机的主要部件...............................6 2.4斗式提升机的工作原理