扭矩传感器T4A.docVIP

T4A, T4WA-S3 Torque/Screw Torque Transducer Special features – Torque measurement in any direction – T4WA-S3: Also provides angle of rotation and rotation speed measurement complete with detection of direction of rotation – Nominal torques: 5 NVm, 10 NVm, 20 NVm, 50 NVm, 100 NVm, 200 NVm, 500 NVm and 1 kNVm – Simple mounting with the aid of square connections – Compact and easy to handle Dimensions in mm; 1 mm 0.03937 inches Torque: T4A: T4WA-S3: 6-wire shielded cable, 3 m long, unterminated 4-wire shielded cable, 3 m long, unterminated Driven side external square DIN3121 2 1 1 2 Type Driven side Drive 1 2 T4A and T4WA-S3 5–50 NVm 3/8’’ 3/8’’ 1 2 External square Internal square Drive internal square DIN3121 DIN 3121–F10 DIN 3121–G10 T4A and T4WA-S3 100 NVm 1/2’’ 1/2’’ External square Internal square 2 1 2 1 T4A and T4WA-S3 200 NVm DIN 3121–F12,5 DIN 3121–G12,5 2 1 T4A and T4WA-S3 500 NVm 3/4’’ 3/4’’ 2 1 Angle of rotation / rotation speed External square Internal square T4WA-S3 only 4–wire shielded cable, 3 m long, unterminated DIN 3121–F20 DIN 3121–H20 T4A and T4WA-S3 1 kNVm 1’’ 1’’ 1 2 for T4../500 N?m for T4../1 kN?m External square Internal square DIN 3121–F25 DIN 3121–H25 23.T4A.54 en 广州南创电子科技有限公司 Specifications Type T4A/T4WA-S3 0.1 Accuracy class Torque measuring system Nominal torque 0.2 NVm 5 10 20 50 100 200 500 1000 Nominal sensitivity nom. output signal at nominal torque Characteristic tolerance mV/V % 2 0.2 Effect of temperature per 10 K in nominal temp. range on the output signal by reference to actual value on the zero signal by reference to nominal sensitivity % % 0.1 0.1 Linearity deviation including hysteresis % 0.2 0.1 by reference to nominal sensitivity Relative standard deviation of reproducibility to DIN 1319 by reference to variation of the output signal % 0.05 Input resistance at reference temperature T4A Torque measuring system of T4WA-S3 Output resistance at reference temperature Ohm