热风干燥机(苏州创发铸造机械有限公司).docVIP

热风干燥机 简介 该机为改进型电热式干燥设备，其结构紧凑，设计合理，使用方便。与其他烘干设备相比，具有节能、省时、轻便灵活易操作、成本低等优点。适用于铸造行业中水玻璃砂、树脂砂型（芯）砂的表面烘干，由于型（芯）砂的表面干燥度直接影响到铸件的质量，采用热风表面烘干机是型（芯）砂烘干的必要和首选设备。 特点 热风干燥机不同于其他烘干设备,它能边烘干边鼓风，从而能使砂型（芯）喷刷涂料后的水分，在受热后从型（芯）的内部向表面迁移，蒸发、汽化、并在热风中扩散消失，从而得到砂型（芯）烘干目的。 该机控制系统为手动可调式，采用三组分档式控制，可分为30kw、45kw、60kw、90kw\110kw以满足不同温度时所需功率。 Hot air dryer Brief introduction The machine is improved heating drying equipment, its compact structure, reasonable design, easy to use. Compared with other drying equipment which has energy-saving, time-saving, light and flexible and easy to operate, low cost advantages. For foundry industry silicate sand, resin sand core sand surface drying, since type core sand surface dryness directly affects the quality of the casting, the surface of hot air dryer is the type core sand drying dry the device for first choice. Feature Unlike other hot air dryer drying equipment, drying its side edges to make sand blast core stenciled paint after the water in the heat and from the type core of internal migration to the surface, evaporation, vaporization, and in the hot air diffusion disappear, resulting in sand core drying purposes. The machine is manually adjustable control system, using the three-component file type control, can be divided into 30kw, 45kw, 60kw, 90kw \ 110kw to meet the required power at different temperatures. 主要技术参数The main technical parameters 型号 model ?外形尺寸 size （mm） 加热功率heater power （kw） 出口温度 Outlet temperature （°） 风机功率fan power （kw） 风机全压fan pressure （pa） 出风管直径 The duct diameter （mm） ?出风管长 The wind pipe length（mm） CFZ23-75 2500×1200×800 60 0～220 3 2281 ?60×2根 ?4M～/根 CFZ23-110 2500×1500×1000 110 0～250 5.5 3000 ?2-4根 ?4M～/根