7405显示面板说明.docVIP

Viewing Angle keys allow you to adjust the display so that it can be optimally viewed from different angles. 视角键允许您调整显示屏,以便它可以从不同的角度达到最佳的观察效果。 Esc. The Esc (escape) key cancels any entry in progress. Esc will abort a print (if one is in progress) and clear error messages from the status line at the bottom of the display. It also clears input and tracking generator overload conditions. ESC键可以取消任意输入的程序。ESC将终止打印（若果打印任务进行中）并且可以清除来自屏幕底部状态行的错误信息。ESC也能够清除输入和示踪发生器过多的内容。 Menu keys are the unlabeled keys next to the screen. The menu key labels are the annotation on the screen next to the unlabeled keys. Most of the labeled keys on the analyzer front panel (also called front-panel keys) access menus of keys having related functions. 菜单键是屏幕旁边的无标识键。这些菜单键的含义解释位于旁边屏幕上。这些键的大部分标签在频谱仪面板的相关函数键的进入菜单。 FREQUENCY Channel, SPAN X Scale, and AMPLITUDE Y Scale are the three large keys that activate the primary analyzer functions and access menus of related functions. The secondary labels on these keys (Channel, X Scale, and Y Scale) are used in some measurements. 频率通道，X比率范围，Y比率幅度键是三个大键，是主要的频谱仪功能键并且是进入相关功能菜单键。这些键的第二功能标签（通道、X比例、Y比例）被应用于某些测量。 CONTROL functions access menus that allow you to adjust the resolution bandwidth, adjust the sweep time, and control the analyzer display. They also set other analyzer parameters needed for making measurements. 控制功能键将进入允许你调整相关带宽的菜单， 扫描时间，控制分析仪显示。该键也可以设置其他一些需要标注测量值的频谱仪参数。 MEASURE accesses a menu of keys that automate some common analyzer measurements. Once a measurement is running, Meas Setup accesses additional menu keys for defining your measurement. Meas Control and Restart access additional measurement control functions. 测量键将进入菜单中一些频谱仪常见的自动化测量进程。一旦进入测量过程，测量设置键将进入附加菜单键以便决定你的测量进程。测量控制键和复位键将用于调整测量控制功能。 SYSTEM functions affect the state of the entire analyzer. Various setup and alignment routines are accessed with the System key. The green Preset key resets the analyzer to a known state. The File key menu allows you to save and load setups, traces, sta